HSS Spiral Point Hand Tap 8-36
(Pack of
1.0)
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap
• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Abrasive Bristle Wire Belt Steel 23mm
Couldn't load pickup availability
E-Z Kut Reinforced Abrasive Wheel 3"
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Blue 17mm
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability
HSS Spiral Point Hand Tap M16 x 2
Couldn't load pickup availability
Pilotdrive Cryotap 1/4"-28 Starter Hand Tap
Couldn't load pickup availability
HSS Spiral Point Hand Tap M12 x 1.75
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap M12 x 1.5
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 5/16-18
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M16 x 1.5
Couldn't load pickup availability
Wire Stripper-Cutter 6" Stainless Steel Jaws
Couldn't load pickup availability
Hex Key Set, Balldriver, Ball Hex, 9pc
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Product Description
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 61116 |
|---|---|
| Type | Machine Screw |
| Diameter | #8 |
| Pitch | 36 |
| Flutes | 2 |
| Thread Length | 3/8 " |
| H Limits | GH2 |
| Material | HSS |
| Recommended Drill Size | No. 29 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.015 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
