Low Profile Portable Magnetic Drill 2"
(Pack of
1.0)
• Capacity: 2" x 2"
• Height (maximum): 7"
• Weight: 26 lbs.
• Magnet: 2,250 lbs.
• Incredible Capacity: The only low-profile drill on the market with this capacity (2" x 2")
• Reversible handle
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold. Insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Annular Cutter Center Pin 7/16"
Couldn't load pickup availability
Annular Cutter Ejector Pin For 1" Cutting Depth Cutters
Couldn't load pickup availability
Annular Cutter Ejector Pin For 2" Cutting Depth Cutters
Couldn't load pickup availability
Blue-Kote II Vented High Density Flap Disc 4-1/2"
Couldn't load pickup availability
Blue-Kote II Vented High Density Flap Disc 4-1/2"
Couldn't load pickup availability
Blue-Kote II Vented High Density Flap Disc 4-1/2"
Couldn't load pickup availability
Portable Magnetic Drill 1-1/2"
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 32 TPI
Couldn't load pickup availability
Double End Drill Bit 1/8"
Couldn't load pickup availability
CryoBit Twin Bit 1/8" dia. 135o Split Point, Stubby Length, No Flats
Couldn't load pickup availability
Product Description
• Capacity: 2" x 2"• Height (maximum): 7"
• Weight: 26 lbs.
• Magnet: 2,250 lbs.
• Incredible Capacity: The only low-profile drill on the market with this capacity (2" x 2")
• Reversible handle
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold. Insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1574606 |
|---|---|
| Height | 7 " |
| Width | 4 " |
| Length | 13 " |
| Magnetic Dead Lift | 2,250 |
| Motor | 1.6 hp 120V 10A 1200W (Single phase) |
| Arbor Bore | 3/4 " |
| Cutter Diameter | 2 " |
| Depth of Cut | 2 " |
| Drill Point Breakaway | 2250 |
| Magnetic Base | "8" X "3-7/8"X"1.5" |
| Centerline Pilot to Motor Face | 1-19/64 " |
| Centerline Pilot to Magnet Face | 1-25/64 " |
| UNSPSC #: | 23241801 |
| TAA Compliant: | Yes |
| Weight: | 0.0 lb |
