Pilotdrive Cryotap 1/4"-28 Starter Hand Tap
(Pack of
1)
SKU:DY80635010 Item#: DY80635010
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Master Series Penlight Flashlight
$0.00
Couldn't load pickup availability
2.1 Round Head Ratchet 1/4 Drive 168 Tooth
$0.00
Couldn't load pickup availability
Anti-Rattle/Squeak BRS Tape 8 x 10"
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M6 x 1.0 Starter Hand Tap
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap #10-24 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 8-32
$0.00
Couldn't load pickup availability
Drill-Tap
$0.00
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 1-1/8-12
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 3/8-16
$0.00
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
$0.00
Couldn't load pickup availability
Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635010 |
|---|---|
| Type | Fractional |
| Diameter | 1/4 " |
| Pitch | 28 |
| Flutes | 4 |
| Thread Length | 5/8 " |
| H Limits | H3 |
| Overall Length | 2-1/2 " |
| Recommended Drill Size | No. 3 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.03 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
