Pilotdrive Cryotap M14 x 2.0 Starter Hand Tap
(Pack of 1)

SKU:DY80636024 Item#: DY80636024

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Read More

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Frequently Bought Together

DV_ZoomOriginal_I_93228.jpg

Abrasive Hand Pad All Purpose 6 x 9"

Item#: 93228
DV_ZoomOriginal_I_DY80170030.jpg

1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank

Item#: DY80170030
DV_ZoomOriginal_P_CTPMP1140.jpg

Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 32 TPI

Item#: DY80324232
DV_ZoomOriginal_I_DY89320014.jpg

2Pc Index-Tend Pry Bar Set

Item#: DY89320014
DV_ZoomOriginal_P_HT5290.jpg

2.1 Round Head Ratchet 3/8 Drive 168 Tooth

Item#: DY89285105
DV_ZoomOriginal_I_DY89310224.jpg

8" Dual Jaw Adj and Pipe Wrench

Item#: DY89310224
DV_ZoomOriginal_I_P85316.jpg

Rocker Panel Molding Clip Nylon White 12 x 20mm

Item#: P85316
DV_ZoomOriginal_I_KT13527.jpg

Front Bumper Trim Panel/Running Board Split Rivet

Item#: KT13527
DV_ZoomOriginal_I_KT13321.jpg

Front/Rear Bumper Push-Type Retainer Nylon 20mm

Item#: KT13321
DV_ZoomOriginal_I_63495.jpg

HSS Spiral Point Hand Tap M3 x 0.5

Item#: 63495
DV_ZoomOriginal_P_CTPMP1169.jpg

Pilotdrive Cryotap #8-32 Starter Hand Tap

Item#: DY80635004
DV_ZoomOriginal_I_61148.jpg

HSS Spiral Point Hand Tap 1-8

Item#: 61148
DV_ZoomOriginal_P_546.jpg

4-Flute HSS Taper Hand Tap M12 x 1.5

Item#: 63476
DV_ZoomOriginal_P_41525.jpg

Carbon Steel Replacement Hand Tap 5/16-18

Item#: 61332
DV_ZoomOriginal_P_41525.jpg

Carbon Steel Replacement Hand Tap M16 x 1.5

Item#: 61362
DV_ZoomOriginal_I_DY89310247.jpg

Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper

Item#: DY89310247
DV_ZoomOriginal_I_1638948.jpg

3" Pneumatic Cut-Off Tool

Item#: 1638948
DV_ZoomOriginal_P_HT5095.jpg

18" Locking Smooth Operator Clamp

Item#: DY89840518

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#: DY80636024
Type Metric
Diameter M14
Pitch 2.0 mm
Flutes 4
Overall Length 3-19/32 "
Recommended Drill Size 12 mm
UNSPSC #: 23241615
TAA Compliant: No
Weight: 0.135 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Your Recently Viewed Items