Spiral Point Hand Tap, High Speed Steel, 2 Flute, M3 x 0.5, 1-15/16" Overall Length
(Pack of
1)
SKU:63495 Item#: 63495
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap
• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
NOTE: Item No. 63495 does not have reduced neck or threads.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Air Saw Blade 4" 24TPI
$0.00
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Fender Lining Screw Grommet Nylon #12
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap M10 x 1.5
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 8-36
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap 10-24
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap M8
$0.00
Couldn't load pickup availability
Cryotap 7/16"-20 Bottoming Hand Tap
$0.00
Couldn't load pickup availability
7" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
$0.00
Couldn't load pickup availability
Product Description
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
NOTE: Item No. 63495 does not have reduced neck or threads.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63495 |
|---|---|
| Type | Metric |
| Diameter | M3 |
| Pitch | 0.5 mm |
| Flutes | 2 |
| Material | HSS |
| Overall Length | 1-15/16 " |
| Recommended Drill Size | 2.5 mm |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.01 lb |
