Pilotdrive Cryotap M18 x 1.5 Starter Hand Tap
(Pack of 1.0)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Frequently Bought Together

Zirconium Grain Locking Grinding Disc 2"

Polymer Wheel Rubber Eraser 30mm

Spot Weld Remover Drill Bit HSS 2-3/4" (M8)

High-Strength Double Side Molding Tape 1/2" x 50'

Panel Sealer Adhesive Clear 10fl.oz

Flex-E-6001 Seam Sealer with Turbo Mixer

Inner Fender Shield Attaching Clip Nylon Black

Drive Rivet Nylon M8

Bumper Radiator and Grille Drive Rivet 7mm Hole

HSS Spiral Point Hand Tap M12 x 1.75

HSS Spiral Point Hand Tap 10-24

HSS Spiral Point Hand Tap 1/4-20

Carbon Steel Replacement Hand Tap M16 x 1.5

Cryo-Drap 7/16"-14 Drill & Tap Combo, 135o Split Point, W/Flats

Item#: DY80244422

4-Flute HSS Bottoming Hand Tap M14 x 2

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

Razor Blade Single Edge w/Notch

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80636027
Type	Metric
Diameter	M18
Pitch	1.5 mm
Flutes	4
Overall Length	4-1/32 "
Recommended Drill Size	21/32 "
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.24 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Abrasive Hand Pad All Purpose 6 x 9"

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

Sheet Metal Drill Bit Alloy Steel 3/16"

Scotch-Brite Roloc Bristle Disc 2"

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Abrasive Bristle Wire Belt Steel 23mm

Your Recently Viewed Items