Wear Resistant Plates Torchable Hardness 62Rc
(Pack of
1)
SKU:EG09905700 Item#: EG09905700
Wearplates for maintenance. Plates are smaller wearplates designed for use by the maintenance welder. They can be torch cut to any dimension and are small enough to fit around most contoured surfaces.
• Economical – Cost less and last longer and can be applied up to 15 times faster than conventional hardfacing
• Wear Resistant – Through hardened to 62Rc and will outlast conventional hardfacing by up to ten times
• Less Distortion – Much less welding required for application
• 1/4" and 3/8" plates designed to resist moderate impact
• Hardness: 62 Rc
• ASTM G65 Abrasion Test: 96.35 mm³ vol. loss
Frequently Bought Together
Wear Plates Used By Maintenance Welder 1/4X4X5
$0.00
Couldn't load pickup availability
Light Weight Composite Wear Plates 36X4X13/64
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Fender Lining Screw Grommet Nylon #12
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
Wear Plates Used By Maintenance Welder
$0.00
Couldn't load pickup availability
Light Weight Composite Wear Plates 24X4X13/64
$0.00
Couldn't load pickup availability
Light Weight Composite Wear Plates 4X4X13/64
$0.00
Couldn't load pickup availability
Heat Stick 650F Degrees
$0.00
Couldn't load pickup availability
Heat Stick 850F Degrees
$0.00
Couldn't load pickup availability
Cap Whip-Lead Connector #4 to #1
$0.00
Couldn't load pickup availability
Product Description
Wearplates for maintenance. Plates are smaller wearplates designed for use by the maintenance welder. They can be torch cut to any dimension and are small enough to fit around most contoured surfaces.• Economical – Cost less and last longer and can be applied up to 15 times faster than conventional hardfacing
• Wear Resistant – Through hardened to 62Rc and will outlast conventional hardfacing by up to ten times
• Less Distortion – Much less welding required for application
• 1/4" and 3/8" plates designed to resist moderate impact
• Hardness: 62 Rc
• ASTM G65 Abrasion Test: 96.35 mm³ vol. loss
Technical Specifications
| Item#: | EG09905700 |
|---|---|
| Type | Hard Steel |
| Total Thickness | 1/4 " |
| Plate Width | 5 " |
| Plate Length | 7 " |
| Size | 5"x 7" x 1/4 " |
| Bulk Hardness | 62 |
| UNSPSC #: | 30102201 |
| TAA Compliant: | Yes |
| Weight: | 2.4 lb |
