Wear Plates Used By Maintenance Welder
(Pack of
1.0)
Wearplates for maintenance. Plates are smaller wearplates designed for use by the maintenance welder. They can be torch cut to any dimension and are small enough to fit around most contoured surfaces.
• Economical – Cost less and last longer and can be applied up to 15 times faster than conventional hardfacing
• Wear Resistant – Through hardened to 62Rc and will outlast conventional hardfacing by up to ten times
• Less Distortion – Much less welding required for application
• 1/4" and 3/8" plates designed to resist moderate impact
• Hardness: 62 Rc
• ASTM G65 Abrasion Test: 96.35 mm³ vol. loss
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
Rechargeable Penlight Flashlight
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
1/2 on 1/2 Dimension I Double Pass Overlay
Couldn't load pickup availability
1/4 on 3/8 Dimension I Single Pass Overlay
Couldn't load pickup availability
3/8 on 3/8 Dimension I Double Pass Overlay
Couldn't load pickup availability
201 Rectangular Wear Disc Plate 3 x 6 x 5/32"
Couldn't load pickup availability
Heat Stick 1050F Degrees
Couldn't load pickup availability
Wear Plates Used By Maintenance Welder 1/4X4X5
Couldn't load pickup availability
Product Description
Wearplates for maintenance. Plates are smaller wearplates designed for use by the maintenance welder. They can be torch cut to any dimension and are small enough to fit around most contoured surfaces.• Economical – Cost less and last longer and can be applied up to 15 times faster than conventional hardfacing
• Wear Resistant – Through hardened to 62Rc and will outlast conventional hardfacing by up to ten times
• Less Distortion – Much less welding required for application
• 1/4" and 3/8" plates designed to resist moderate impact
• Hardness: 62 Rc
• ASTM G65 Abrasion Test: 96.35 mm³ vol. loss
Technical Specifications
| Item#: | EG09903438 |
|---|---|
| Type | Hard Steel |
| Total Thickness | 3/8 " |
| Plate Width | 3 " |
| Plate Length | 4 " |
| Size | 3"x 4"x 3/8 " |
| Bulk Hardness | 62 |
| UNSPSC #: | 30102201 |
| TAA Compliant: | Yes |
| Weight: | 1.2 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
