Hand Tap Kit, High Speed Steel, Gold Oxide Finish, 4 Flute, Taper, Plug and Bottoming Taps, 1-8, 2-1/2" Thread Length
(Pack of
1)
SKU:61074 Item#: 61074
Lawson Tap Sets include Taper, Plug and Bottoming Style Taps; replacement taps are available in each style.
Taper Style
8 to 10 threads chamfered. For easy thread starting in tough materials.
Plug Style
3 to 5 threads chamfered. For general use when tapping to bottom of hole is not critical.
Bottoming Style
1-1/2 threads chamfered. Use after threads have been started for tapping to bottom of hole.
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
• Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Spot Weld Remover Drill Bit HSS 2-1/4" (M6)
$0.00
Couldn't load pickup availability
1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
$0.00
Couldn't load pickup availability
Mini-Hole Saw Kit
$0.00
Couldn't load pickup availability
3-Flute HSS Taper Hand Tap M2.5 x 0.45
$0.00
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap M12 x 1.5
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 5/16-18
$0.00
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
$0.00
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
$0.00
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
$0.00
Couldn't load pickup availability
4-Flute HSS Plug Hand Tap M14 x 1.5
$0.00
Couldn't load pickup availability
Cryo-Drap #10-24 Drill & Tap Combo, 135o Split Point, W/Flats
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 1/2-13
$0.00
Couldn't load pickup availability
Interchangeable Hex Bit Set 20Pc Torx
$0.00
Couldn't load pickup availability
12" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Product Description
Lawson Tap Sets include Taper, Plug and Bottoming Style Taps; replacement taps are available in each style.Taper Style
8 to 10 threads chamfered. For easy thread starting in tough materials.
Plug Style
3 to 5 threads chamfered. For general use when tapping to bottom of hole is not critical.
Bottoming Style
1-1/2 threads chamfered. Use after threads have been started for tapping to bottom of hole.
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
• Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 61074 |
|---|---|
| Type | Fractional |
| Style | Set |
| Material | High Speed Steel |
| Diameter | 1 " |
| Decimal Equivalent | 1.0000 " |
| Pitch | 8 |
| Flutes | 4 |
| Thread Length | 2-1/2 " |
| H Limits | GH4 |
| Number of Pieces | 3 |
| Recommended Drill Size | 7/8 " |
| Description | One each of Taper, Plug and Bottoming Style Taps |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 2.03 lb |
