5/8x4 Mas-Tap HD Hex Head Concrete Screw Anchor
(Pack of
5)
• One-piece heavy-duty anchor with sharp aggressive concrete cutting threads
• Easy to install and can be removed
• Serrated teeth under the head grip to installed fixtures
• Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
• Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
• Works with standard properly sized masonry drill bits, no special bit required
• Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Frequently Bought Together
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Light-Medium Duty Anchor Assortment 555Pcs
Couldn't load pickup availability
Hollow Wall Screw Anchor Assortment 196Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 35mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 35mm
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 3/16 x 3-3/4"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 3/16 x 3-1/4"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head #14-10 x 2-1/4"
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
Couldn't load pickup availability
Product Description
• One-piece heavy-duty anchor with sharp aggressive concrete cutting threads• Easy to install and can be removed
• Serrated teeth under the head grip to installed fixtures
• Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
• Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
• Works with standard properly sized masonry drill bits, no special bit required
• Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Technical Specifications
| Item#: | DY09993153 |
|---|---|
| Diameter | 5/8 " |
| Length | 4 " |
| Type | Screw Anchor |
| Material | Carbon Steel |
| Minimum Embedment | 2-1/2 " |
| Finish | Zinc |
| Drive | 15/16 " |
| Drill Size | 5/8 " |
| Head Style | Hex |
| Drive Style | 15/16 " |
| Minimum Hole Depth | 2-7/8 " |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 0.01 lb |
Product Restrictions
