664 Gasless Mild Steel Flux Core Mig /Excelent For Gavanized Or Thin Metals/All Position/Polarity Dcen
(Pack of
10)
SKU:EG66440035 Item#: EG66440035
• Self shielded — no gas required
• Designed for single pass welds only
• Excellent for galvanized steel and thin metal
• Minimum spatterEasy to useAll-position
• Operates at low voltage and amperage— reduces burn-through on thin materials
• Tensile strength: 76,000 psi/524 Mpa
• Hardness: 93 Rb min
• Current: DCEN
• Gas: self-shielding
Remove heavy contamination, scaly rust, layered paint and other substances that may interfere with the arc. Galva-Tech FC is designed to weld through most foreign contaminants, but precleaning always helps. When working on sheet metal, tack welding the joint all along the seam helps to reduce distortion; however, it usually cannot be eliminated. Using X-Ergon Kul-Therm™ on both sides of the weld and using the skip weld technique will also help to reduce distortion. Use a stringer bead with low voltage and a drag technique. Allow welds to cool in still air.
Frequently Bought Together
660 Mild Steel Flux Core Low Hydrogen Mig Wire 1/16X33Lb
$0.00
Couldn't load pickup availability
104 Mild Steel Low Hydrogen Stick Electrode
$0.00
Couldn't load pickup availability
103 The Ultimate Low Hydrogen Mild Steel Electrode 1/8
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
ER70S-6 Mild/Carbon Steel MIG Welding Wire 0.023"
$0.00
Couldn't load pickup availability
Rosin Core Solder 0.032"
$0.00
Couldn't load pickup availability
Plastic Inside Corner No Wave Welder Staple
$0.00
Couldn't load pickup availability
106 Mild Steel All Purpose Electrode
$0.00
Couldn't load pickup availability
606 Duraweld M Mig Wire Maintenance Grade Mild Steel Solid Mig Wire
$0.00
Couldn't load pickup availability
Er70S-6 Mild/Carbon Steel Mig Welding Wire 0.035
$0.00
Couldn't load pickup availability
10Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
Wobble Hex Bit Socket Set 10Pc Sae 3/8Dr
$0.00
Couldn't load pickup availability
8" Heavy-Duty Power Jaw Pliers
$0.00
Couldn't load pickup availability
10Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
Wobble Hex Bit Socket Set 10Pc Sae 3/8Dr
$0.00
Couldn't load pickup availability
8" Heavy-Duty Power Jaw Pliers
$0.00
Couldn't load pickup availability
Product Description
• Self shielded — no gas required• Designed for single pass welds only
• Excellent for galvanized steel and thin metal
• Minimum spatterEasy to useAll-position
• Operates at low voltage and amperage— reduces burn-through on thin materials
• Tensile strength: 76,000 psi/524 Mpa
• Hardness: 93 Rb min
• Current: DCEN
• Gas: self-shielding
Remove heavy contamination, scaly rust, layered paint and other substances that may interfere with the arc. Galva-Tech FC is designed to weld through most foreign contaminants, but precleaning always helps. When working on sheet metal, tack welding the joint all along the seam helps to reduce distortion; however, it usually cannot be eliminated. Using X-Ergon Kul-Therm™ on both sides of the weld and using the skip weld technique will also help to reduce distortion. Use a stringer bead with low voltage and a drag technique. Allow welds to cool in still air.
Technical Specifications
| Item#: | EG66440035 |
|---|---|
| Welding Process | Flux-Core Arc Welding |
| Type | Flux-Cored Wire |
| Diameter | .035 |
| Base Metal | Galvanized Steel |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 11.3 lb |
