Home Welding Hardfacing Alloys Build-up 7770 Hard Facing Buildup Stick Rod Electrode 1/4"
Build-up
DV_ZoomOriginal_I_CW1876.jpg
DV_ZoomOriginal_I_CW1876.jpg

7770 Multi-Purpose Hard Facing Buildup Stick Rod Electrode, 40 to 45 (WH) HRC Hardness, 250 to 350 Amps, AC/DCRP Polarity, 1/4"
(Pack of 5)

Item#: CW1876

Cronatron®

Work hardening alloy for high impact and compressive loads
Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
All-position alloy for buildup on all types of steel
Elongation: 35%
Hardness: Rc 45, work-hardened
Polarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
• Buildup and overlay for hardfacing
• Repairs on all types of steels including manganese and stainless
• Ideal for crusher rolls, jaws, frog and switch railroad repairs
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT

Read More
Check Availability
Usually Ships: Today
While Supplies Last

Frequently Bought Together

DV_ZoomOriginal_I_EG1703100B.jpg

170 Build Up Of Carbon And Low Alloy Steels 1/8

Item#: EG1703100B
DV_ZoomOriginal_I_CW1879.jpg

7770 Hard Facing Buildup Stick Rod Electrode 5/32"

Item#: CW1879
DV_ZoomOriginal_I_P12675.jpg

706 Hard Facing Buildup Stick Rod Electrode 5/32"

Item#: P12675
DV_ZoomOriginal_P_WDPMP1065.jpg

194 High Impact Manganese Steel Alloy 5/32

Item#: EG19430000
DV_ZoomOriginal_P_WDPMP1056.jpg

170 Build Up Of Carbon And Low Alloy Steels 3/16

Item#: EG1702000B
DV_ZoomOriginal_I_P19557.jpg

7310 Carbide Hard Facing MIG Welding Wire 0.045"

Item#: CW1803
DV_ZoomOriginal_I_1513544.jpg

Radiator Grille Nut M4.2-1.41

Item#: 1513544
DV_ZoomOriginal_I_KT12847.jpg

Bumper Fascia Push-Type Retainer Nylon 18mm

Item#: KT12847
DV_ZoomOriginal_I_1457520.jpg

Molding Clip with Sealer Nylon White 11.5 x 21

Item#: 1457520
DV_ZoomOriginal_P_WDPMP1124.jpg

Light Weight Composite Wear Plates 24X4X13/64

Item#: EG09910424
DV_ZoomOriginal_I_CW1477.jpg

Flat Soapstone 1/2"

Item#: CW1477
DV_ZoomOriginal_I_EG71600000.jpg

Pipe Wrap Around

Item#: EG71600000
DV_ZoomOriginal_I_1224096.jpg

Fender Trim Molding Clip Nylon White 13 x 15mm

Item#: 1224096
DV_ZoomOriginal_I_P80606.jpg

Upper Grille Retainer Nylon 1-1/4"

Item#: P80606
DV_ZoomOriginal_I_1506366.jpg

DTM Primer Tan

Item#: 1506366
DV_ZoomOriginal_I_1224096.jpg

Fender Trim Molding Clip Nylon White 13 x 15mm

Item#: 1224096
DV_ZoomOriginal_I_P80606.jpg

Upper Grille Retainer Nylon 1-1/4"

Item#: P80606
DV_ZoomOriginal_I_1506366.jpg

DTM Primer Tan

Item#: 1506366

Product Description

Work hardening alloy for high impact and compressive loads
Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
All-position alloy for buildup on all types of steel
Elongation: 35%
Hardness: Rc 45, work-hardened
Polarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
• Buildup and overlay for hardfacing
• Repairs on all types of steels including manganese and stainless
• Ideal for crusher rolls, jaws, frog and switch railroad repairs
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT

Technical Specifications

Item#: CW1876
Welding Process Stick
Type Stick Electrode
Diameter 1/4 "
Base Metal Multi-Purpose
Hardness 40-45 (WH) HRC
Polarity AC/DCRP
UNSPSC #: 23271810
TAA Compliant: Yes
Weight: 6.0 lb

Product Restrictions

Suggested Products

DV_ZoomOriginal_I_P19543.jpg

706 Hard Facing Buildup MIG Welding Wire 1/16"

Item#: P19543
DV_ZoomOriginal_I_P12785.jpg

706 Hard Facing Buildup Stick Rod Electrode 3/32"

Item#: P12785
DV_ZoomOriginal_I_P12775.jpg

706 Hard Facing Buildup Stick Rod Electrode 1/8"

Item#: P12775
DV_ZoomOriginal_I_P19557.jpg

706 Hard Facing Buildup MIG Welding Wire 0.045"

Item#: P19557
DV_ZoomOriginal_I_CW1880.jpg

7770 Hard Facing Buildup Stick Rod Electrode 1/8"

Item#: CW1880
DV_ZoomOriginal_I_CW1881.jpg

7770 Hard Facing Buildup Stick Rod Electrode 3/32"

Item#: CW1881
DV_ZoomOriginal_I_CW1878.jpg

7770 Hard Facing Buildup Stick Rod Electrode 3/16"

Item#: CW1878
DV_ZoomOriginal_P_WDPMP1056.jpg

170 Build Up Of Carbon And Low Alloy Steels 3/16

Item#: EG1702000B
DV_ZoomOriginal_I_EG1703100B.jpg

170 Build Up Of Carbon And Low Alloy Steels 1/8

Item#: EG1703100B

Your Recently Viewed Items