706 Multi-Purpose Hard Facing Buildup Stick Rod Electrode, 40 to 45 (WH) HRC Hardness, 110 to 150 Amps, AC/DCRP Polarity, 1/8"
(Pack of
10)
SKU:P12775 Item#: P12775
Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.
Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT
Frequently Bought Together
170 Build Up Of Carbon And Low Alloy Steels 1/8
$0.00
Couldn't load pickup availability
7770 Hard Facing Buildup Stick Rod Electrode 5/32"
$0.00
Couldn't load pickup availability
706 Hard Facing Buildup Stick Rod Electrode 5/32"
$0.00
Couldn't load pickup availability
176 Extreme Abrasion With Impact 3/8X18IN
$0.00
Couldn't load pickup availability
676 Flux Core Wire Extreme Abrasion Moderate Impact 1/16X33LBS
$0.00
Couldn't load pickup availability
281 Martensitic Hard Facing Welding Wire 0.045"
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 15mm
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
Anti Splatter Heat Resistant Welding Mat 2 x 3'
$0.00
Couldn't load pickup availability
Light Weight Composite Wear Plates 4X4X13/64
$0.00
Couldn't load pickup availability
Light Weight Composite Wear Plates 36X4X13/64
$0.00
Couldn't load pickup availability
Product Description
Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT
Technical Specifications
| Item#: | P12775 |
|---|---|
| Welding Process | Stick |
| Type | Stick Electrode |
| Diameter | 1/8 " |
| Base Metal | Multi-Purpose |
| Hardness | 40-45 (WH) HRC |
| Polarity | AC/DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 10.4 lb |
Product Restrictions
