Air Brake Hose Fitting Assembly Kit for 3/8" ID Hose, 3/8" End, DOT-FMVSS 106, SAE J1402C
(Pack of
1)
SKU:88874 Item#: 88874
Two 3/8" NPTF Swivel Fittings for 3/8" I.D. Air Brake Hose
• Eliminate expensive downtime and maintenance with a permanent emergency field repair system• Easily remove and replace air brake hose assemblies (only tool required for complete assembly is a 5/16" hex key)• Decreases the high cost of stocking a full line of air brake hose assemblies• Makes emergency on-the-road repair simple
• Meets all SAE and D.O.T. Specifications (D.O.T. – FMVSS 106; SAE – J1402C)• Recommended working pressure 150 PSI (most tractor-trailers operate at 120 PSI)
Frequently Bought Together
Terne Steel Hydraulic Brake Lines 3/16" x 12"
$0.00
Couldn't load pickup availability
7916
$0.00
Couldn't load pickup availability
PVF Steel Hydraulic Brake Lines 1/4" x 30"
$0.00
Couldn't load pickup availability
DOT Compression Connector Male Brass 3/8 x 3/8"
$0.00
Couldn't load pickup availability
Hose Clamp 304 SS 1/2 to 29-32"
$0.00
Couldn't load pickup availability
Silicone Coolant/Heater Hose Clamp 9/16 to 1-1/16"
$0.00
Couldn't load pickup availability
Hose Clamp 304 SS 1-1/16 to 2"
$0.00
Couldn't load pickup availability
Super 77 Miniature Hose Clamp SS 5/16 to 7/8"
$0.00
Couldn't load pickup availability
Silicone Coolant/Heater Hose Clamp SS 1-1/16 to 2"
$0.00
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/8-27
$0.00
Couldn't load pickup availability
Hose Clamp 304 SS 9/16 to 1-1/16"
$0.00
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 7/16 to 1"
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Product Description
Two 3/8" NPTF Swivel Fittings for 3/8" I.D. Air Brake Hose• Eliminate expensive downtime and maintenance with a permanent emergency field repair system• Easily remove and replace air brake hose assemblies (only tool required for complete assembly is a 5/16" hex key)• Decreases the high cost of stocking a full line of air brake hose assemblies• Makes emergency on-the-road repair simple
• Meets all SAE and D.O.T. Specifications (D.O.T. – FMVSS 106; SAE – J1402C)• Recommended working pressure 150 PSI (most tractor-trailers operate at 120 PSI)
Technical Specifications
| Item#: | 88874 |
|---|---|
| Category / Performance | Air Brake Hose End Fitting Assembly Kit |
| Industry Rating 1 | DOT - FMVSS 106 |
| Industry Rating 2 | SAE J1402C |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.26 lb |
Product Restrictions
