Aligning Reamer, High Speed Steel, Gold Finish, Straight Shank, Right Hand Spiral Flute, 2-7/8" Flute Length, 3/8 x 4"
(Pack of
1)
SKU:86861 Item#: 86861
• Enter holes half their nominal diameter
• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
NOTE: 3/8" dia. does not have 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryocut 9/16" 5-Flute Reamer, 1/2" Shank
$0.00
Couldn't load pickup availability
Cryocut 3/4" 5-Flute Reamer, 1/2" Shank
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 15/16"
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 24 TPI
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 11/16"
$0.00
Couldn't load pickup availability
Step Reamer Set
$0.00
Couldn't load pickup availability
Taper Pin Reamer HSS 7"
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-1/4" (M6)
$0.00
Couldn't load pickup availability
10" Forman's Favorite Heavy-Duty Copper & Aluminum Cable Cutter Pliers
$0.00
Couldn't load pickup availability
Small Index-Tend Pry Bar
$0.00
Couldn't load pickup availability
Product Description
• Enter holes half their nominal diameter• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
NOTE: 3/8" dia. does not have 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 86861 |
|---|---|
| Type | Aligning |
| Material | High Speed Steel |
| Diameter | 3/8 " |
| Decimal Equivalent | 0.3750 " |
| Shank Type | Straight |
| Finish | Gold |
| Shank Size | 1/2 |
| Flats | 3 |
| Flute Type | Right Hand Spiral |
| Flute Length | 2-7/8 " |
| Pilot Drill Diameter | 3/16 |
| Material Thickness | 1 |
| Overall Length | 4 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
| Weight: | 0.1 lb |
