Chucking Reamer, Cobalt, Straight Shank, Straight Flute, 1-3/4" Flute Length, 3/8 x 7"
(Pack of
1)
SKU:1289943 Item#: 1289943
These high-quality reamers are designed for most standard needs.
Reamers are made to a plus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Chucking Reamer HSS 10mm
Couldn't load pickup availability
Chucking Reamer HSS 8mm
Couldn't load pickup availability
Chucking Reamer HSS 3/4"
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Aligning Reamer HSS 11/16"
Couldn't load pickup availability
Step Reamer Set
Couldn't load pickup availability
Taper Pin Reamer HSS 7"
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
Couldn't load pickup availability
0.5 HP Reciprocating Air Saw
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Product Description
These high-quality reamers are designed for most standard needs.Reamers are made to a plus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1289943 |
|---|---|
| Reamer Type | Fractional |
| Type | Chucking |
| Material | Cobalt |
| Diameter | 3/8 " |
| Decimal Equivalent | .3750 " |
| Shank Type | Straight |
| Shank Size | .3105 " |
| Flute Type | Straight |
| Flute Length | 1-3/4 |
| Overall Length | 7 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
