CryoNitride 3/4" Dia. End Mill, 2-Flute, Double End, Center Cut, 3/4" Shank Dia., 1-5/16" Cutting Depth
(Pack of
1)
SKU:DY81573340 Item#: DY81573340
• Increased Productivity - Cryophase™ treatment extends service life by up to six times
• High Performance - Cryonite coating provides heat resistance up to 1450°F and allows for dry cutting on many materials
• Fast Cutting - Cuts up to 75% faster than conventional end mills while virtually eliminating loading and chatter when set up properly
• Clean Finish - Faster chip clearing design provides a better surface finish
Specifications
• Hardness (Core/Surface)
2-Flute: 64Rc/88Rc
4-Flute: 68Rc/88Rc
• Heat Resistance (Core/Surface)
2-Flute: 1100°F/1450°F
4-Flute: 1200°F/1450°F
• Material: High Speed Steel
• Style: Center Cut (Plunge Cut)
• Heat Treatment: Triple austempered
• Cryophase™: Thermal cycling cryogenic treatment
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Jobber Length Drill Bit HSS 6.5mm
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
CryoNitride 3/4" Dia. End Mill, 4-Flute, Double End, Center Cut
$0.00
Couldn't load pickup availability
Cobalt End Mill 3 Flute Triple Cut 3/4"
$0.00
Couldn't load pickup availability
Cobalt End Mill 2 Flute Double End 3/16"
$0.00
Couldn't load pickup availability
Solid Carbide End Mill 4 Flute Single End 1/4"
$0.00
Couldn't load pickup availability
Cobalt End Mill 4 Flute Single End 7/8"
$0.00
Couldn't load pickup availability
Cobalt End Mill 4 Flute Single End 1/2"
$0.00
Couldn't load pickup availability
2.1 Round Head Ratchet 3/8 Drive 168 Tooth
$0.00
Couldn't load pickup availability
DTM High Build Seam Sealer White 10fl.oz
$0.00
Couldn't load pickup availability
Adhesive-Back Shim Stock 1/8 x 5/8" x 50'
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
$0.00
Couldn't load pickup availability
Universal Socket Set, Metric, 3/8" Drive, 12pc
$0.00
Couldn't load pickup availability
Small Index-Tend Pry Bar
$0.00
Couldn't load pickup availability
Product Description
• Increased Productivity - Cryophase™ treatment extends service life by up to six times• High Performance - Cryonite coating provides heat resistance up to 1450°F and allows for dry cutting on many materials
• Fast Cutting - Cuts up to 75% faster than conventional end mills while virtually eliminating loading and chatter when set up properly
• Clean Finish - Faster chip clearing design provides a better surface finish
Specifications
• Hardness (Core/Surface)
2-Flute: 64Rc/88Rc
4-Flute: 68Rc/88Rc
• Heat Resistance (Core/Surface)
2-Flute: 1100°F/1450°F
4-Flute: 1200°F/1450°F
• Material: High Speed Steel
• Style: Center Cut (Plunge Cut)
• Heat Treatment: Triple austempered
• Cryophase™: Thermal cycling cryogenic treatment
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY81573340 |
|---|---|
| Material | High Speed Steel |
| Finish | AlTiN |
| Cutting Diameter | 3/4 " |
| Cutting Length | 1-5/16 " |
| Flutes | 2 |
| Shank Size | 3/4 " |
| Overall Length | 5 " |
| UNSPSC #: | 27112803 |
| TAA Compliant: | No |
| Weight: | 0.57 lb |
Product Restrictions
