Screw Extractor, Removes Stripped-Out and Damaged Screws Quickly and Easily, Reusable, #3, Number 12 to14
(Pack of
1)
SKU:63214 Item#: 63214
• Reusable – just clean off chips and lubricate
• Removes stripped-out and damaged screws quickly and easily
• Removes most screw types including Phillips, TORX®, square drive, Pozidriv® and most tamper-proof screws
• For use in variable speed hand drills set in reverse
Burnishing:1. Insert remover end of GRABIT® directly into drill.2. Set drill in reverse (counterclockwise).3. Place burnishing end of tool into damaged screw; slowly clean inside screw head until smooth.Removing:1. Insert burnishing end of GRABIT® directly into drill; removing end is now showing.2. Maintain reverse setting (counterclockwise).3. Place remover end of tool into smooth screw head.4. Apply firm downward pressure; drill at very low speed.5. Remover end of GRABIT® will thread into the head and remove the screw.
NOTE: Burnishing tool end is not to be used to drill holes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Stemmed Knot-Type Wire Wheel 3"
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
Couldn't load pickup availability
E-Z Kut Reinforced Abrasive Wheel 3"
Couldn't load pickup availability
Spiral Fluted Screw Extractor 3/16 to 1/4"
Couldn't load pickup availability
Spiral Fluted Screw Extractor 3/4 to 1"
Couldn't load pickup availability
Spiral Fluted Screw Extractor 9/16 to 3/4"
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Micro Screw Power Extractor Number 5 to 6
Couldn't load pickup availability
Universal Internal Thread Repair 7/8 to 1-1/4"
Couldn't load pickup availability
Universal External Thread Repair 1-3/8 to 6"
Couldn't load pickup availability
Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs
Couldn't load pickup availability
Comfort Grip Ergonomic Mini Awl, 4 pc Hook & Pick Set
Couldn't load pickup availability
Wire Stripper-Cutter 6" Stainless Steel Jaws
Couldn't load pickup availability
Product Description
• Reusable – just clean off chips and lubricate• Removes stripped-out and damaged screws quickly and easily
• Removes most screw types including Phillips, TORX®, square drive, Pozidriv® and most tamper-proof screws
• For use in variable speed hand drills set in reverse
Burnishing:1. Insert remover end of GRABIT® directly into drill.2. Set drill in reverse (counterclockwise).3. Place burnishing end of tool into damaged screw; slowly clean inside screw head until smooth.Removing:1. Insert burnishing end of GRABIT® directly into drill; removing end is now showing.2. Maintain reverse setting (counterclockwise).3. Place remover end of tool into smooth screw head.4. Apply firm downward pressure; drill at very low speed.5. Remover end of GRABIT® will thread into the head and remove the screw.
NOTE: Burnishing tool end is not to be used to drill holes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63214 |
|---|---|
| Type | Screw Remover |
| Industry Number | 3 |
| For Sizes | No. 12 - No. 14 |
| UNSPSC #: | 27111709 |
| TAA Compliant: | No |
| Weight: | 0.05 lb |
