Drive Anchor Alloy Steel 1/4 x 3"
(Pack of
25.0)
• Made of high-strength heat-treated alloy steel with zinc plating
• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
Frequently Bought Together
Masonry Anchor Assortment 700Pcs
Item#: LP729BL
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
Item#: LP728BL
Couldn't load pickup availability
Toggle Bolt Anchor Assortment 70Pcs
Item#: LP665BL
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm
Item#: 55603
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 12mm
Item#: 28678
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 25mm
Item#: 28681
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Item#: 1089482
Couldn't load pickup availability
Acrysol Auto Body Degreaser 16oz
Item#: P60170
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Item#: P10200
Couldn't load pickup availability
Product Description
• Made of high-strength heat-treated alloy steel with zinc plating• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
Technical Specifications
| Item#: | 64554 |
|---|---|
| Diameter | 1/4 " |
| Length | 3 " |
| Hole Diameter | 1/4 " |
| Type | Drive Anchors |
| Minimum Embedment | 1-1/8 " |
| Material | Steel |
| Ultimate Load In 3,000 PSI Concrerte | 2,010 lb |
| Finish | Zinc |
| UNSPSC #: | 31162101 |
| TAA Compliant: | Yes |
| Weight: | 1.1 lb |
Product Restrictions
