Drop-In Anchor, Steel, 3/8 x 1-9/16"
(Pack of
25)
An all-steel anchor
Use with standard bolts for flush mount applications in concrete or masonry
Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Frequently Bought Together

Wallboard Anchor Assortment
Couldn't load pickup availability

Anchor Kit Steel 103Pcs
Couldn't load pickup availability

Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability

Drop-In Anchor Steel 1/2 x 2"
Couldn't load pickup availability

Drop-In Anchor High Strength 5/16-18 x 2-7/16"
Couldn't load pickup availability

Drop-In Anchor High Strength 3/4-10 x 6-1/2"
Couldn't load pickup availability

Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability

Open End Rivet Dome Head Aluminum 5/32"
Couldn't load pickup availability

Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability

Rear Bumper Cover Retainer Plastic 18mm
Couldn't load pickup availability

Bumper and Wheel Well Liner Push-Type Retainer
Couldn't load pickup availability

Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Product Description
An all-steel anchor Use with standard bolts for flush mount applications in concrete or masonry
Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
Item#: | 96953 |
---|---|
Diameter | 3/8 " |
Overall Length | 1-9/16 " |
Type | Expansion Drop-In Anchor |
Drill Size | 1/2 " |
Allowable Tension (4,000 psi Concrete) | 973 lb |
Allowable Shear (4,000 psi Concrete) | 1,148 lb |
UNSPSC #: | 31162101 |
TAA Compliant: | No |
Weight: | 1.47 lb |
Product Restrictions
