E7018 Mild/Carbon Steel Stick Electrode 3/16"
(Pack of
30.0)
This low-hydrogen electrode is designed with an inorganic covering to reduce the presence of diffusible hydrogen. Hydrogen is detrimental to the physical properties of many steels. E7018 is an all-position, mild steel, low-hydrogen coated electrode that reduces the need for preheat on heavy sections and can be used on high strength, high carbon and some low alloy steels. E7018 electrodes are characterized by a smooth quiet arc, low spatter and medium penetration. Store dry and sealed or in a rod oven. Use DCEP.
Frequently Bought Together
321 Mild and Carbon Steel MIG Welding Wire 0.024"
Couldn't load pickup availability
E7018 Mild/Carbon Steel Stick Electrode 3/16
Couldn't load pickup availability
360 Mild and Carbon Steel Stick Rod Electrode 1/8"
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Flint For Spring Loaded Trigger Torch Lighter
Couldn't load pickup availability
Cronatron Welding Guide
Couldn't load pickup availability
Heat Stick 400F Degrees
Couldn't load pickup availability
21008 Plasma Cutting Tip
Couldn't load pickup availability
Oxy-Therm Battery 12V
Couldn't load pickup availability
192050 Plasma Cutting Shield Cup
Couldn't load pickup availability
SAE Flat Washer 3/4" 13/16" ID 1-1/2" OD
Couldn't load pickup availability
Trunk Lid and Rear Light Grommet with Sealer Nylon
Couldn't load pickup availability
Hex Cap Screw Grade 5 7/16-20 x 4"
Couldn't load pickup availability
Product Description
This low-hydrogen electrode is designed with an inorganic covering to reduce the presence of diffusible hydrogen. Hydrogen is detrimental to the physical properties of many steels. E7018 is an all-position, mild steel, low-hydrogen coated electrode that reduces the need for preheat on heavy sections and can be used on high strength, high carbon and some low alloy steels. E7018 electrodes are characterized by a smooth quiet arc, low spatter and medium penetration. Store dry and sealed or in a rod oven. Use DCEP.Technical Specifications
| Item#: | EG12027018 |
|---|---|
| Welding Process | Stick |
| Type | Stick |
| Diameter | 3/16 " |
| Base Metal | Mild & Carbon Steel |
| Size | 3/16 " |
| UNSPSC #: | 23271810 |
| TAA Compliant: | No |
| Weight: | 30.31 lb |
