Expansion Shield Anchor 5/16"
(Pack of
25.0)
• Evenly distributed four-way expansion of anchor wall by internal nut
• Excellent holding power in concrete, brick, stone and cinder block
• Corrosion-resistant, non-deteriorating zinc alloy casting bends and conforms without fracturing
• Meets GSA Specification FF-S-325 3.2.2.2.1.3
• Use for anchoring medium and heavy loads in solid and hollow-base materials
• Typical applications: Guard rails, fascia, equipment hangers, straps, conduit, overhead plumbing installations and suspended heating and air conditioning ductwork
1. Drill hole to at least shield length.
2. Clean hole with air or wet swab.
3. Place Forway® Expansion Shield in the hole.
4. Position fixture or equipment.
5. Insert screw or bolt through equipment into shield and tighten.
NOTE: Screws not included.
Forway® is a registered trademark of U.S.E. Diamond, Inc.
Tensile strength, shear strength and tensile block values shown; a 4:1 safety factor is recommended.
Frequently Bought Together
Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Pin Drive Expansion Anchor Steel 3/4 x 5"
Couldn't load pickup availability
Lead Machine Screw Anchor 5/16-18
Couldn't load pickup availability
Lead Machine Screw Anchor 1/4-20
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 35mm
Couldn't load pickup availability
Acorn Nut A2 Stainless Steel M6-1
Couldn't load pickup availability
Open End Rivet Large Flange Head Aluminum 3/16"
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Wheel House Molding Split Rivet Aluminum 3/16"
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Product Description
• Evenly distributed four-way expansion of anchor wall by internal nut• Excellent holding power in concrete, brick, stone and cinder block
• Corrosion-resistant, non-deteriorating zinc alloy casting bends and conforms without fracturing
• Meets GSA Specification FF-S-325 3.2.2.2.1.3
• Use for anchoring medium and heavy loads in solid and hollow-base materials
• Typical applications: Guard rails, fascia, equipment hangers, straps, conduit, overhead plumbing installations and suspended heating and air conditioning ductwork
1. Drill hole to at least shield length.
2. Clean hole with air or wet swab.
3. Place Forway® Expansion Shield in the hole.
4. Position fixture or equipment.
5. Insert screw or bolt through equipment into shield and tighten.
NOTE: Screws not included.
Forway® is a registered trademark of U.S.E. Diamond, Inc.
Tensile strength, shear strength and tensile block values shown; a 4:1 safety factor is recommended.
Technical Specifications
| Item#: | 96959 |
|---|---|
| Anchor Size | 5/16 " |
| Type | Forway Expansion Shield Anchor |
| Drill Size | 9/16 " |
| 3,000 PSI Concrete Shear Strength | 3,300 lb |
| Tensile Block | 2,100 lb |
| Thread Pitch | 18 |
| 3,000 PSI Concrete Tensile Strength | 2,600 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | Yes |
| Weight: | 1.06 lb |
Product Restrictions
