Forged Body Ball Valve, Brass, 2 x 2", Female NPT x Female NPT, 600PSI
(Pack of
1)
SKU:63141 Item#: 63141
For use in gas and pneumatic lines, this Forged Body Ball Valve is ideal for high-pressure and high-temperature applications where reliability and safety are important. Made of brass with dual sealing system that allows valve to be operated in either direction making installation easier. Other advantages include no metal-to-metal moving parts, a handle clearly showing ball position and no maintenance requirements.
• 24-hour 100% seal test guaranteed
• Working pressure: 600 PSI
• Operating temperature: –40°F to +350°F
• Chrome plated brass ball for longer life
• Silicone-free lubricant on all seals
• Approvals: CSA, FM, UL, CUL, Federal Specification WW-V-35C
Applications:
• Gas
• Pneumatic lines
• Travel stops on body to avoid stresses at stem
• Hot forged, sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications
• Full port to DIN 3357 for maximum flow
• NPT taper ANSI B.1.20.1 female by female threads
• Blowout-proof nickel plated brass stem
• Two FPM O-rings at the stem for maximum safety
• Geomet® carbon steel handle with thick PVC dip coating for thermal and electrical protection
• Handle removable with valve in service
• Pure PTFE self-lubricating seats with flexible-lip design
Frequently Bought Together
Water Line Elbow Brass 90° 3/8-18 x 3/8"
Couldn't load pickup availability
Compression Tube Support Brass 6 x 4mm
Couldn't load pickup availability
Compression Run Tee Brass 1/4 x 1/4-18 x 1/4"
Couldn't load pickup availability
Copper Reducing Tee, 3/4" x 3/4" x 1/2"
Couldn't load pickup availability
Copper Male Adapter Coupling, 3/4" x 3/4"
Couldn't load pickup availability
Copper Reducing Adapter Coupling, 1" x 3/4"
Couldn't load pickup availability
Air Hose Ferrule Brass 21/32"
Couldn't load pickup availability
Ergonomic Blowgun 1/4"
Couldn't load pickup availability
Ergonomic Blow Gun Rubber Tip
Couldn't load pickup availability
Shroud Insulating Button Nylon 11/16"
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Product Description
For use in gas and pneumatic lines, this Forged Body Ball Valve is ideal for high-pressure and high-temperature applications where reliability and safety are important. Made of brass with dual sealing system that allows valve to be operated in either direction making installation easier. Other advantages include no metal-to-metal moving parts, a handle clearly showing ball position and no maintenance requirements.• 24-hour 100% seal test guaranteed
• Working pressure: 600 PSI
• Operating temperature: –40°F to +350°F
• Chrome plated brass ball for longer life
• Silicone-free lubricant on all seals
• Approvals: CSA, FM, UL, CUL, Federal Specification WW-V-35C
Applications:
• Gas
• Pneumatic lines
• Travel stops on body to avoid stresses at stem
• Hot forged, sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications
• Full port to DIN 3357 for maximum flow
• NPT taper ANSI B.1.20.1 female by female threads
• Blowout-proof nickel plated brass stem
• Two FPM O-rings at the stem for maximum safety
• Geomet® carbon steel handle with thick PVC dip coating for thermal and electrical protection
• Handle removable with valve in service
• Pure PTFE self-lubricating seats with flexible-lip design
Technical Specifications
| Item#: | 63141 |
|---|---|
| Fitting Type | Ball Valve |
| Configuration | Forged Body for Gas Lines |
| Material | Brass |
| Connection Type A x B | Female NPT x Female NPT |
| Fitting Dimension A | 2-11-1/2 |
| Fitting Dimension B | 2-11-1/2 |
| Working Pressure | 600 PSI |
| Temperature Range | -40 to 350 °F |
| UNSPSC #: | 40170000 |
| TAA Compliant: | No |
| Weight: | 3.92 lb |
Product Restrictions
