Weatherhead H145 Hydraulic Hose, Neoprene, 2-Steel Braided, 1/2" ID, 11/16" OD, 250' Length, 3045PSI, SAE 100R17
(Pack of
250)
SKU:64626 08 Item#: 64626 08
250 ft. rolls consist of no more than three pieces with none shorter than 25 feet. Total length may vary ±25%.
• Agency Ratings: SAE 100R17AT
• Fittings Certified: Z-Series; U-Series (-6 through -12); 430 U-Series (-16 only); S-Series (except -4 and -10)
• Agency Approvals: MSHA, Marine Application J1942/1 Hydraulic Service
• Construction:
– Inner Tube: Nitrile
– Reinforcement: Single braid (-4, -6); double braid (-8 through -16)
– Cover: Neoprene
• Temperature Range:
– -4 through -8: –40°F to +250°F (–40°C to +121°C)
– -10 through -16: –40°F to +212°F (–40°C to +100°C)
• Application Notes:
– Used for high-pressure hydraulic lines on off-road equipment, farm equipment and other high pressure applications
– Tight minimum bend radius and improved flexibility
– Provides 3,045 PSI working pressure rating for all sizes
Important: Weatherhead no longer supports the use of the U Series fitting on the 1/4" H145. The Z Series fitting is the only approved fitting for this diameter of the H145.
*Use 430 U-Series fittings only. Must be crimped with T-420, T-440 or T-480 crimpers and corresponding dies and rings.
*Use 430 U-Series fittings only. Must be crimped with T-420, T-440 or T-480 crimpers and corresponding dies and rings.
Frequently Bought Together
3TR8 Hydraulic Thermoplastic Hose 0.59" x 50'
$0.00
Couldn't load pickup availability
3TR18CT Hydraulic Thermoplastic Hose 0.58" x 50'
$0.00
Couldn't load pickup availability
3TR7N Hydraulic Thermoplastic Hose 0.57" x 250'
$0.00
Couldn't load pickup availability
Air Conditioning O-Ring HNBR Green
$0.00
Couldn't load pickup availability
Spacer Ring Yellow/White
$0.00
Couldn't load pickup availability
Air Conditioning O-Ring HSN 10.7 x 15.5mm
$0.00
Couldn't load pickup availability
DOT Connector Male Brass 5/8 x 1/2-14
$0.00
Couldn't load pickup availability
All-Plastic Ergonomic Venturi Blow Gun
$0.00
Couldn't load pickup availability
Pipe Bushing Brass 3/8-18 x 1/4-18
$0.00
Couldn't load pickup availability
Inner Panel Rustproofer LV 16.5oz
$0.00
Couldn't load pickup availability
Cable Tie Hook and Loop Roll 15' Orange
$0.00
Couldn't load pickup availability
High-Strength Double Side Molding Tape 1/2" x 50'
$0.00
Couldn't load pickup availability
AG-Lite Rubber Water Hose Assembly 5/8" x 50'
$0.00
Couldn't load pickup availability
AG-Lite Rubber Water Hose Lead In 5/8" x 6'
$0.00
Couldn't load pickup availability
AG-Lite Rubber Water Hose Assembly 3/4" x 15'
$0.00
Couldn't load pickup availability
Fender and Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Product Description
250 ft. rolls consist of no more than three pieces with none shorter than 25 feet. Total length may vary ±25%.• Agency Ratings: SAE 100R17AT
• Fittings Certified: Z-Series; U-Series (-6 through -12); 430 U-Series (-16 only); S-Series (except -4 and -10)
• Agency Approvals: MSHA, Marine Application J1942/1 Hydraulic Service
• Construction:
– Inner Tube: Nitrile
– Reinforcement: Single braid (-4, -6); double braid (-8 through -16)
– Cover: Neoprene
• Temperature Range:
– -4 through -8: –40°F to +250°F (–40°C to +121°C)
– -10 through -16: –40°F to +212°F (–40°C to +100°C)
• Application Notes:
– Used for high-pressure hydraulic lines on off-road equipment, farm equipment and other high pressure applications
– Tight minimum bend radius and improved flexibility
– Provides 3,045 PSI working pressure rating for all sizes
Important: Weatherhead no longer supports the use of the U Series fitting on the 1/4" H145. The Z Series fitting is the only approved fitting for this diameter of the H145.
*Use 430 U-Series fittings only. Must be crimped with T-420, T-440 or T-480 crimpers and corresponding dies and rings.
*Use 430 U-Series fittings only. Must be crimped with T-420, T-440 or T-480 crimpers and corresponding dies and rings.
Technical Specifications
| Item#: | 64626 08 |
|---|---|
| Industrial / Hydraulic | Hydraulic |
| Type | Rubber - Steel Braided |
| Category / Performance | High Pressure |
| Industry Rating 1 | SAE 100R17 |
| Industry Rating | MSHA Accepted, Marine Application J1942/1 Hydraulic only |
| Manufacturer Series Number | H145 |
| Manufacturer Series Name | Weatherhead |
| I.D. | 1/2 (-8) " |
| Hose O.D. | 11/16 " |
| Working Pressure | 3,045 PSI |
| Burst Pressure | 12,180 PSI |
| Fitting Series | Z Series, U Series, S Series |
| Bend Radius | 3-1/2 " |
| Inner Tube Material | Nitrile |
| Hose Reinforcement | 2 Steel Braids |
| Hose Cover Material | Neoprene |
| Temperature | High |
| Material | Hydraulic Oil |
| Applications | Hydraulic - Constant Flow |
| Temperature Range | -40F to +212F |
| UNSPSC #: | 40142020 |
| TAA Compliant: | No |
| Weight: | 92.0 lb |
