Home Fasteners Bolts Cap Screws Hex Cap Screw Grade 9 Alloy Steel 7/8-9 x 2-1/4"
Bolts
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg

Hex Cap Screw, Grade 9, Alloy Steel, Zinc Finish, Coarse Thread, 21/32" Head Height, 1-5/16" Across Flats, 7/8-9 x 2-1/4"
(Pack of 10)

Item#: A731

Tru-Torq®

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Read More
Check Availability
Usually Ships: Today
While Supplies Last

Catalog page#: 11-7

Frequently Bought Together

DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 35mm

Item#: 28694
DV_ZoomOriginal_P_517.jpg

Hex Cap Screw Property Class 8.8 M6-1 x 16mm

Item#: 27330
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 35mm

Item#: 28688
DV_ZoomOriginal_P_6610.jpg

Hex Cap Screw Grade 10.9 Alloy Steel M6-1 x 25mm

Item#: 10205
DV_ZoomOriginal_P_6610.jpg

Hex Cap Screw Grade 10.9 Alloy Steel M10-1.5 x 25mm

Item#: 10224
DV_ZoomOriginal_P_517.jpg

Hex Cap Screw Property Class 8.8 M6-1 x 12mm

Item#: 27329
DV_ZoomOriginal_P_519.jpg

Hex Nut Grade 8 Steel M6-1

Item#: 4302
DV_ZoomOriginal_P_30780.jpg

Open End Rivet Dome Head Aluminum 5/32"

Item#: 1968
DV_ZoomOriginal_P_11056.jpg

Serrated Hex Flange Nut Alloy Steel M10-1.25

Item#: 28701
DV_ZoomOriginal_P_519.jpg

Hex Nut Grade 8 Steel M8-1.25

Item#: 4304
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M6-1 x 16mm

Item#: 59407
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 20mm

Item#: 28680
DV_ZoomOriginal_I_P85437.jpg

Bumper Drive Rivet Plastic 10mm Hole

Item#: P85437
DV_ZoomOriginal_I_1579409.jpg

Bumper Cover Push-Type Retainer Nylon 18mm

Item#: 1579409
DV_ZoomOriginal_I_P85253.jpg

Shield Push-Type Retainer with Metal Insert

Item#: P85253
DV_ZoomOriginal_I_PM08154300.jpg

Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank

Item#: PM08154300
DV_ZoomOriginal_I_1636306.jpg

Adhesion Promoter - 16oz

Item#: 1636306
DV_ZoomOriginal_P_HT5271.jpg

Adjustable 4-Pos T-Handle 1/2 Drive

Item#: DY89310603
DV_ZoomOriginal_I_PM08154300.jpg

Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank

Item#: PM08154300
DV_ZoomOriginal_I_1636306.jpg

Adhesion Promoter - 16oz

Item#: 1636306
DV_ZoomOriginal_P_HT5271.jpg

Adjustable 4-Pos T-Handle 1/2 Drive

Item#: DY89310603

Product Description

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Technical Specifications

Item#: A731
Style Premium
Diameter 7/8 "
Thread Pitch 9
Thread Coarse
Length 2-1/4 "
Type Hex Cap Screw
Across Flats 1-5/16 "
Material Alloy Steel
Grade 9
Finish Bright Zinc
Tensile Strength 180,000 PSI
Head Style High Hex
Head Height 21/32 "
Thread Form UNJ
Thread Length Partial
Thread Length Minimum 2 "
UNSPSC #: 31161501
TAA Compliant: Yes
Weight: 5.79 lb

Product Restrictions

Suggested Products

DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm

Item#: 55603
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm

Item#: 55604
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm

Item#: 55602
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm

Item#: 55608
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 16mm

Item#: 28679
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 25mm

Item#: 28687
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 12mm

Item#: 28678
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 25mm

Item#: 28681
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M6-1 x 16mm

Item#: 59407
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 20mm

Item#: 28680
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm

Item#: 55607
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm

Item#: 55609

Your Recently Viewed Items