Hi-Load Masonry Anchor, Hex Bolt, Steel, Dichromate Zinc Finish, 14mm Drill Size, M10 x 100mm
(Pack of
2)
SKU:50504 Item#: 50504
• 8.8 metric grade steel with yellow dichromate zinc plating
• Exceptional strength coupled with the ability to resist vibratory loads
• Designed to equally distribute force to all sides
• Center plastic ring prevents anchor from spinning during installation
• Stud version can be adjusted for standoff height (shimming and leveling)
• Hex bolt version for applications where a finished appearance is required
• Removable; no cutting required
• Collapsible sleeve allows for secure clamping force
• Heavy-duty expansion sleeve provides follow-up expansion for fastening in tension zones of concrete such as under bridge decks, floor slabs and beams
• Designed for seismic (subject to or caused by an earthquake, vibration, strong impact or earth shaking) and dynamic (constant applied load) applications
• Applications include heavy machinery, conveyors, safety railings, dock bumpers and connecting structural components
Installation Procedure
1. Drill hole to correct diameter and depth.
2. Remove dust and rubble from hole with compressed air and a brush.
3. Using a hammer, tap the anchor through the material to be fastened until the anchor is firmly seated.
4. Tighten the anchor to the specified torque.
*Maximum values shown; use one-fourth of the ultimate tensile and shear capacities for the recommended 4:1 safety factor.
Frequently Bought Together
Masonry Anchor Assortment 243Pcs
$0.00
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
$0.00
Couldn't load pickup availability
Light-Medium Duty Anchor Assortment 555Pcs
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 25mm
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M10-1.5
$0.00
Couldn't load pickup availability
Hex Flange Nut Grade 10 Steel M10-1.5
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 3/8 x 1-7/8"
$0.00
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 1/4 x 2"
$0.00
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 5"
$0.00
Couldn't load pickup availability
Bumper and Lower Deflector Specialty Rivet 4.8mm
$0.00
Couldn't load pickup availability
Sudzzâ„¢ Car Wash 5gal
$0.00
Couldn't load pickup availability
Wall Mount Dispenser for Hand Cleaner
$0.00
Couldn't load pickup availability
Bumper and Lower Deflector Specialty Rivet 4.8mm
$0.00
Couldn't load pickup availability
Sudzzâ„¢ Car Wash 5gal
$0.00
Couldn't load pickup availability
Wall Mount Dispenser for Hand Cleaner
$0.00
Couldn't load pickup availability
Product Description
• 8.8 metric grade steel with yellow dichromate zinc plating• Exceptional strength coupled with the ability to resist vibratory loads
• Designed to equally distribute force to all sides
• Center plastic ring prevents anchor from spinning during installation
• Stud version can be adjusted for standoff height (shimming and leveling)
• Hex bolt version for applications where a finished appearance is required
• Removable; no cutting required
• Collapsible sleeve allows for secure clamping force
• Heavy-duty expansion sleeve provides follow-up expansion for fastening in tension zones of concrete such as under bridge decks, floor slabs and beams
• Designed for seismic (subject to or caused by an earthquake, vibration, strong impact or earth shaking) and dynamic (constant applied load) applications
• Applications include heavy machinery, conveyors, safety railings, dock bumpers and connecting structural components
Installation Procedure
1. Drill hole to correct diameter and depth.
2. Remove dust and rubble from hole with compressed air and a brush.
3. Using a hammer, tap the anchor through the material to be fastened until the anchor is firmly seated.
4. Tighten the anchor to the specified torque.
*Maximum values shown; use one-fourth of the ultimate tensile and shear capacities for the recommended 4:1 safety factor.
Technical Specifications
| Item#: | 50504 |
|---|---|
| Length | 100 mm |
| Type | Hi-Load Masonry Anchor |
| Drill Size | 14 mm |
| Material | Carbon Steel |
| Maximum Fastened Material Thickness | 25 mm |
| Reommended Torque | 36 ft·lbf |
| Size | M10X100MM mm |
| Minimum Embedment | 73 mm |
| Ultimate Shear Strength 4,000 PSI Concrete | 8,905 lb |
| Diameter | M10 |
| Ultimate Tensile Strength 4,000 PSI Concrete | 6,788 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | Yes |
| Weight: | 0.54 lb |
