Pipe Hand Tap, High Speed Steel, Gold Oxide Finish, 1/2-14 NPT, 1-3/8" Thread Length
(Pack of
1)
SKU:63508 Item#: 63508
Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
Gold oxide finish enhances chip flow
Minimizes seizing and binding
Requires less torque
Produces a more accurate hole
Sizes permanently marked on all taps
Manufactured from high-speed steel
Wear-resistant
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 32 TPI
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3" (M10)
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
HSS Pipe Hand Tap 2 to 11-1/2
$0.00
Couldn't load pickup availability
Cryotap 3/8"-18 NPT Hand Tap
$0.00
Couldn't load pickup availability
HSS Pipe Hand Tap 3/8-18
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Cryo-Drap 7/16"-14 Drill & Tap Combo, 135o Split Point, W/Flats
$0.00
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M14 x 2
$0.00
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M4 x 0.7
$0.00
Couldn't load pickup availability
Jobber Length Drill Bit HSS 6.5mm
$0.00
Couldn't load pickup availability
10" Forman's Favorite Heavy-Duty Copper & Aluminum Cable Cutter Pliers
$0.00
Couldn't load pickup availability
10Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
Product Description
Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications Gold oxide finish enhances chip flow
Minimizes seizing and binding
Requires less torque
Produces a more accurate hole
Sizes permanently marked on all taps
Manufactured from high-speed steel
Wear-resistant
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63508 |
|---|---|
| Material | High Speed Steel |
| Diameter | 1/2 " |
| Pitch | 14 |
| Thread Length | 1-3/8 " |
| Recommended Drill Size | 23/32 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.3 lb |
