Pipe Hand Tap, High Speed Steel, Gold Oxide Finish, 3/4-14 NPT, 1-3/8" Thread Length
(Pack of
1)
SKU:63509 Item#: 63509
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
General Purpose Reciprocating Saw Blade 8"
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Steel Crimped End Brush 1/2"
$0.00
Couldn't load pickup availability
5-Flute Carbon Steel Pipe Hand Tap 1 to 11-1/2
$0.00
Couldn't load pickup availability
HSS Pipe Hand Tap 1/2-14
$0.00
Couldn't load pickup availability
HSS Pipe Hand Tap 1/8-27
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M18 x 2.5
$0.00
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M16 x 2
$0.00
Couldn't load pickup availability
Cryotap 1/2"-13 Tri-Pak
$0.00
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
$0.00
Couldn't load pickup availability
0.5 HP Reciprocating Air Saw
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
Product Description
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63509 |
|---|---|
| Material | High Speed Steel |
| Diameter | 3/4 " |
| Pitch | 14 |
| Thread Length | 1-3/8 " |
| Recommended Drill Size | 59/64 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.53 lb |
