Hand Tap Kit, High Speed Steel, 4-40 to 3/4-10, 16 Pieces
(Pack of
1)
SKU:63491 Item#: 63491
• Spiral point design has a left hand flute at the poin to provide a positive rake and drive the chip ahead of the tap
• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Fire and Rescue Reciprocating Blade 6"
$0.00
Couldn't load pickup availability
Steel Crimped End Brush 1/2"
$0.00
Couldn't load pickup availability
General Purpose Jobber Length Drill Bit HSS 4.8mm
$0.00
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
HSS Hand Tap Kit 28Pcs
$0.00
Couldn't load pickup availability
HSS Plug Hand Tap Kit 10Pcs
$0.00
Couldn't load pickup availability
HSS Pipe Hand Tap Starter Kit 5Pcs
$0.00
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M16 x 2
$0.00
Couldn't load pickup availability
Cryotap 1/2"-13 Tri-Pak
$0.00
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Taper Hand Tap
$0.00
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
$0.00
Couldn't load pickup availability
57Pc Torsion Impact Bit Master Set
$0.00
Couldn't load pickup availability
8" Dual Jaw Adj and Pipe Wrench
$0.00
Couldn't load pickup availability
Product Description
• Spiral point design has a left hand flute at the poin to provide a positive rake and drive the chip ahead of the tap• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63491 |
|---|---|
| Type | Spiral Point and NPT Tap Set |
| Description | USS size: 4-40 through 12-24, 1/4-20 through 1/2-13, 5/8-11 and 3/4-10, SAE size 10-32, NPT sizes 1/8-27 and 1/4-18 |
| Number of Pieces | 16 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 2.52 lb |
