IFI 100/107 Top Locknut, Grade C, Alloy Steel, Zinc/Wax Finish, Coarse Thread, 0.288" Thickness, 7/16" Across Flats, 1/4-20
(Pack of
100)
SKU:80927 Item#: 80927
• Heat-treated for matched strength
• Will not loosen even under severe vibration
• Locking torque is retained for a minimum of five reapplications
• 150,000 PSI minimum proof strength
• Meets IFI and ANSI specifications
• Developed for Grade 8 applications
• Designed for use with Tuff-Torq® Cap Screws
• Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut
NOTE: Not recommended for use above 450°F (232°C).
For recommended torque values, see Lawson’s E546 brochure.
Frequently Bought Together
DIN 125A Flat Washer Grade 140 HV M8
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
$0.00
Couldn't load pickup availability
DIN 985 Locknut with Nylon Insert Grade 8 M12-1.25
$0.00
Couldn't load pickup availability
Flange Locknut Grade 8 Steel M10-1.5
$0.00
Couldn't load pickup availability
Jam Nut with Nylon Insert Grade 2 1-8
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M8-1.25
$0.00
Couldn't load pickup availability
Hex Flange Nut Grade 8 Steel M8-1.25
$0.00
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M6-1
$0.00
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M10-1.25
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
$0.00
Couldn't load pickup availability
N9690 Ninja Ice Dipped Gloves
$0.00
Couldn't load pickup availability
N9690FC Ninja Ice Coated Gloves
$0.00
Couldn't load pickup availability
N9690 Ninja Ice Dipped Gloves
$0.00
Couldn't load pickup availability
Product Description
• Heat-treated for matched strength• Will not loosen even under severe vibration
• Locking torque is retained for a minimum of five reapplications
• 150,000 PSI minimum proof strength
• Meets IFI and ANSI specifications
• Developed for Grade 8 applications
• Designed for use with Tuff-Torq® Cap Screws
• Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut
NOTE: Not recommended for use above 450°F (232°C).
For recommended torque values, see Lawson’s E546 brochure.
Technical Specifications
| Item#: | 80927 |
|---|---|
| Diameter | 1/4 " |
| Thread Pitch | 20 |
| Grade | C |
| Finish | Zinc/Wax |
| Type | Top Lock Nut |
| Material | Alloy Steel |
| Thickness | 0.288 " |
| Across Flats | 7/16 " |
| Thread | Coarse |
| Specifications | IFI 100/107 |
| Maximum Temperature | 450º F |
| Proof | 150,000 PSI |
| Quantity Per Package | 100.0000 |
| UNSPSC #: | 31161716 |
| TAA Compliant: | No |
| Weight: | 0.73 lb |
Product Restrictions
