Large Diameter Tapcon® Anchor, Carbon Steel, Zinc Finish, 1/2 x 5"
(Pack of
10)
SKU:26770 Item#: 26770
• High performance, high production, self-threading anchor
• Carbon steel with zinc plating
• Removable
• Low slippage
• High shear strength
• Finished head
• Vibration-resistant
• Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Frequently Bought Together
Masonry Anchor Phillips Head #14-10 x 2-1/4"
$0.00
Couldn't load pickup availability
Lag Screw Shield Anchor Long Style 3/8 x 2-1/2"
$0.00
Couldn't load pickup availability
Double Expansion Shield Anchor Alloy Steel 5/8"
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 1/8"
$0.00
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
$0.00
Couldn't load pickup availability
Masonry Anchor TORX® Flat Head Steel 1/4 x 3-3/4"
$0.00
Couldn't load pickup availability
Large Diameter Tapcon® Anchor 3/8 x 2-1/2"
$0.00
Couldn't load pickup availability
Masonry Anchor TORX® Flat Head Steel 1/4 x 3-1/4"
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
Product Description
• High performance, high production, self-threading anchor• Carbon steel with zinc plating
• Removable
• Low slippage
• High shear strength
• Finished head
• Vibration-resistant
• Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Technical Specifications
| Item#: | 26770 |
|---|---|
| Diameter | 1/2 " |
| Length | 5 " |
| Type | Screw Anchor |
| Across Flats | 3/4 " |
| Drill Size | 7/16 " |
| Thread Length | 5 " |
| Quantity Per Package | 10.0000 |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 2.93 lb |
