Lock Washer Self-Locking Steel 5/16" (M8)
(Pack of
20.0)
Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. Also for use with flanged bolts or nuts for optimum load distribution.
• Resists loosening caused by vibration
• Ease of assembly and disassembly
• Locking function not affected by lubrication
• Positive locking – low or high preload levels
• Minimum surface marring or scratching
• Zinc flake coated with Delta Protekt® for superior corrosion resistance – up to 6 times longer than standard zinc plating
• Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Couldn't load pickup availability
Catalog page#: 11-30
Frequently Bought Together
Hex Flange Bolt Grade 10.9 M10-1.25 x 60mm
Couldn't load pickup availability
Lock Washer 18-8 Stainless Steel 3/4"
Couldn't load pickup availability
Lock Washer Non-Linking Steel 3/8"
Couldn't load pickup availability
DIN 137 Spring Washer Low Carbon Steel M8
Couldn't load pickup availability
Rear Bumper Cover Retainer Plastic 18mm
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M6
Couldn't load pickup availability
Lock Washer 18-8 Stainless Steel 3/4"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Product Description
Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. Also for use with flanged bolts or nuts for optimum load distribution.• Resists loosening caused by vibration
• Ease of assembly and disassembly
• Locking function not affected by lubrication
• Positive locking – low or high preload levels
• Minimum surface marring or scratching
• Zinc flake coated with Delta Protekt® for superior corrosion resistance – up to 6 times longer than standard zinc plating
• Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Technical Specifications
| Item#: | 1473020 |
|---|---|
| Nominal Size | 5/16" (M8) |
| Type | Self-Locking Lock Washer |
| Material | Carbon Steel |
| I.D. | 0.34 " |
| O.D. | 0.65 " |
| Finish | Delta Protekt® |
| Thickness | 0.10 " |
| UNSPSC #: | 31161801 |
| TAA Compliant: | Yes |
| Weight: | 0.13 lb |
