Masonry Anchor, Hex Washer Head, Type 410 Stainless Steel, Stalgard Coated, #14-10 x 1-3/4"
(Pack of
25)
Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick
Fast installation drill hole, drive anchor
Available in two head styles hex washer head for most applications and Phillips flat head for countersunk applications
Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Frequently Bought Together

Sleeve Type Stud Bolt Anchor Steel 5/8 x 4-1/4"
Couldn't load pickup availability

Sleeve Type Stud Bolt Anchor Steel 3/8 x 6"
Couldn't load pickup availability

Sleeve Type Stud Bolt Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability

Hammerlock Cotter Pin Kit 140Pcs
Couldn't load pickup availability

Hammerlock Cotter Pin Kit 75Pcs
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M10-1.25 x 16mm
Couldn't load pickup availability

3/16X1-1/4 Chrome Ez-One Phillips Pan Hd
Couldn't load pickup availability

5/8x5 Mas-Tap Hd Anchor
Couldn't load pickup availability

Large Diameter Tapcon® Anchor 1/2 x 3"
Couldn't load pickup availability

Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability

Phillips Truss Head Sheet Metal Screw Steel 15mm
Couldn't load pickup availability

Hex Head Sheet Metal Screw with 17mm Washer Steel
Couldn't load pickup availability
Product Description
Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick Fast installation drill hole, drive anchor
Available in two head styles hex washer head for most applications and Phillips flat head for countersunk applications
Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Technical Specifications
Item#: | 59656 |
---|---|
Diameter | #14 |
Length | 1-3/4 " |
Type | Crete-Flex |
Material | Stainless Steel |
Finish | Plain |
Thread Pitch | 10 tpi |
Drive | Hex |
Head Style | Hex Washer Head |
Drive Style | Hex |
UNSPSC #: | 31162104 |
TAA Compliant: | Yes |
Weight: | 0.53 lb |
Product Restrictions


