Masonry Anchor, Slotted Hex Washer Head, Steel, Stalgard Coated, 1/4 x 4"
(Pack of
50)
UltraCon+® Anchors and Drill Bits
• Fast installation – drill hole, drive anchor
• Anchors available in three head styles: Slotted hex washer head for most applications; Phillips flat head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
• Replaces expansion anchors, plugs and screws
• Hi-Lo threads provide exceptional holding strength with no spalling
• Notched cutting edges for easy installation – cuts threads into poured concrete, brick or hollow block
• Gimlet point for self drilling into wood base material
• Reversible and removable
• Stalgard®-coated for superior corrosion resistance – withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
• Carbide-Tipped UltraCon® Masonry Hammer Drill Bits are required – these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor (sold separately)
1/4" dia. UltraCon® Anchors have a blue Stalgard® finish.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.For 3/8" and 1/2" dia. UltraCon® Anchors, see LDT (large dia. TapCon®) Anchor page.
Frequently Bought Together
Sleeve Type Stud Bolt Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 16mm
Couldn't load pickup availability
Large Diameter Tapcon® Anchor 1/2 x 3"
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 17mm Washer Steel
Couldn't load pickup availability
Product Description
UltraCon+® Anchors and Drill Bits• Fast installation – drill hole, drive anchor
• Anchors available in three head styles: Slotted hex washer head for most applications; Phillips flat head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
• Replaces expansion anchors, plugs and screws
• Hi-Lo threads provide exceptional holding strength with no spalling
• Notched cutting edges for easy installation – cuts threads into poured concrete, brick or hollow block
• Gimlet point for self drilling into wood base material
• Reversible and removable
• Stalgard®-coated for superior corrosion resistance – withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
• Carbide-Tipped UltraCon® Masonry Hammer Drill Bits are required – these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor (sold separately)
1/4" dia. UltraCon® Anchors have a blue Stalgard® finish.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.For 3/8" and 1/2" dia. UltraCon® Anchors, see LDT (large dia. TapCon®) Anchor page.
Technical Specifications
| Item#: | 96919 |
|---|---|
| Diameter | 1/4 " |
| Length | 4 " |
| Type | Screw Anchor |
| Material | Carbon Steel |
| Finish | Stalgard-Coated |
| For Material Thickness | 2-1/2 - 3 " |
| Head Style | Hex |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 0.35 lb |
Product Restrictions
