Masonry Sleeve Anchor Steel 1/2 x 2-1/4"
(Pack of
10.0)
• Superior holding power in soft masonry applications such as cinder block, brick and sandstone
• High-strength alloy steel – resistant to shearing and elongation
• Full circumference gripping action for maximum strength – expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
• Non-dishing flat washer provides full positive seating
• Drill and anchor diameter are the same size for easy installation
• Zinc-plated for corrosion resistance
• Anchors are pre-assembled and ready to use
• Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Frequently Bought Together
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Toggle Bolt Anchor Assortment 70Pcs
Couldn't load pickup availability
Drill 'N Drive Masonry Anchor Assortment 283Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 25mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 12mm
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 3/8 x 3"
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 1/4 x 2"
Couldn't load pickup availability
Product Description
• Superior holding power in soft masonry applications such as cinder block, brick and sandstone• High-strength alloy steel – resistant to shearing and elongation
• Full circumference gripping action for maximum strength – expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
• Non-dishing flat washer provides full positive seating
• Drill and anchor diameter are the same size for easy installation
• Zinc-plated for corrosion resistance
• Anchors are pre-assembled and ready to use
• Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Technical Specifications
| Item#: | P34677 |
|---|---|
| Length | 2-1/4 " |
| Type | Sleeve-Type Stud Bolt Anchor |
| Material | Carbon Steel |
| Maximum Fastened Material Thickness | 3/4 " |
| Size | 1/2X2-1/4 " |
| Diameter | 1/2 " |
| Stud Size | 3/8 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.31 lb |
Product Restrictions
