Masonry Sleeve Anchor Steel 1/4 x 2-1/4"
(Pack of
50)
Superior holding power in soft masonry applications such as cinder block, brick and sandstone
High-strength alloy steel resistant to shearing and elongation
Full circumference gripping action for maximum strength expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
Non-dishing flat washer provides full positive seating
Drill and anchor diameter are the same size for easy installation
Zinc-plated for corrosion resistance
Anchors are pre-assembled and ready to use
Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Frequently Bought Together

Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability

Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability

Light-Medium Duty Anchor Assortment 555Pcs
Couldn't load pickup availability

DIN 6921 Hex Flange Bolt Grade 8.8 M8-1.25 x 16mm
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M6-1 x 30mm
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm
Couldn't load pickup availability

Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability

Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability

Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability

Masonry Sleeve Anchor Steel 3/8 x 3"
Couldn't load pickup availability

Masonry Sleeve Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability

Sleeve Type Stud Bolt Anchor Steel 1/4 x 2"
Couldn't load pickup availability
Product Description
Superior holding power in soft masonry applications such as cinder block, brick and sandstone High-strength alloy steel resistant to shearing and elongation
Full circumference gripping action for maximum strength expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
Non-dishing flat washer provides full positive seating
Drill and anchor diameter are the same size for easy installation
Zinc-plated for corrosion resistance
Anchors are pre-assembled and ready to use
Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Technical Specifications
Item#: | P34651 |
---|---|
Length | 2-1/4 " |
Type | Sleeve-Type Stud Bolt Anchor |
Material | Carbon Steel |
Maximum Fastened Material Thickness | 1-1/4 " |
Size | 1/4X2-1/4 " |
Diameter | 1/4 " |
Stud Size | 3/16 " |
UNSPSC #: | 31162101 |
TAA Compliant: | No |
Weight: | 1.67 lb |
Product Restrictions
