Masonry Sleeve Anchor, Steel, Zinc Finish, 5/8 x 4-1/4"
(Pack of
10)
Superior holding power in soft masonry applications such as cinder block, brick and sandstone
High-strength alloy steel resistant to shearing and elongation
Full circumference gripping action for maximum strength expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
Non-dishing flat washer provides full positive seating
Drill and anchor diameter are the same size for easy installation
Zinc-plated for corrosion resistance
Anchors are pre-assembled and ready to use
Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Frequently Bought Together
Anchor Kit Steel 103Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 16mm
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Acrysol Auto Body Degreaser 16oz
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 5/16 x 1-1/2"
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 3/8 x 3"
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability
Product Description
Superior holding power in soft masonry applications such as cinder block, brick and sandstone High-strength alloy steel resistant to shearing and elongation
Full circumference gripping action for maximum strength expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
Non-dishing flat washer provides full positive seating
Drill and anchor diameter are the same size for easy installation
Zinc-plated for corrosion resistance
Anchors are pre-assembled and ready to use
Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Technical Specifications
| Item#: | P34701 |
|---|---|
| Length | 4-1/4 " |
| Type | Sleeve-Type Stud Bolt Anchor |
| Material | Carbon Steel |
| Maximum Fastened Material Thickness | 2-1/4 " |
| Size | 5/8X4-1/4 " |
| Diameter | 5/8 " |
| Stud Size | 1/2 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 3.96 lb |
Product Restrictions
