Nosepiece for KTR® Bulbed Rivets Green 3/16"
(Pack of
1.0)
• All-aluminum fastener with an extended grip range
• Once installed, a large load-bearing surface is formed on the tail side to provide exceptional pull-through values
• Also available with neoprene washer for applications requiring a weather-resistant fastener
• Locked stem provides vibration resistance
• Stem breaks flush with the head, giving a clean appearance and eliminating secondary finishing operations
• Requires special KTR™ Nosepiece, Item No. 97084
• Grip range: 0.187" – 0.375"
• Recommended hole size: 0.204" – 0.209"
• Tensile strength: 450 lbs.
• Shear strength: 700 lbs.
• Developed for joining soft, brittle or ductile materials to metal, and metal to metal
Important: KTR™ Nosepiece must be used to set these rivets. Nosepiece fits Hydraulic Installation Tool No. 95161.
Frequently Bought Together
DIN 125A Flat Washer Grade 140 HV M6
Couldn't load pickup availability
Hammerlock Cotter Pin Kit 140Pcs
Couldn't load pickup availability
Hammerlock Cotter Pin Kit 75Pcs
Couldn't load pickup availability
Nosepiece for 51898 Rivet Tool 3/16"
Couldn't load pickup availability
Pneudraulic Rivet Tool 80 to 90PSI
Couldn't load pickup availability
Replacement Jaw for 1551540 Rivet Tool
Couldn't load pickup availability
Replacement Jaw for 491 Riveting Tool
Couldn't load pickup availability
Open End Rivet Dome Head Stainless Steel 1/8"
Couldn't load pickup availability
Open End Rivet Dome Head Stainless Steel 1/8"
Couldn't load pickup availability
Drive Rivet Nylon M8
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Product Description
• All-aluminum fastener with an extended grip range• Once installed, a large load-bearing surface is formed on the tail side to provide exceptional pull-through values
• Also available with neoprene washer for applications requiring a weather-resistant fastener
• Locked stem provides vibration resistance
• Stem breaks flush with the head, giving a clean appearance and eliminating secondary finishing operations
• Requires special KTR™ Nosepiece, Item No. 97084
• Grip range: 0.187" – 0.375"
• Recommended hole size: 0.204" – 0.209"
• Tensile strength: 450 lbs.
• Shear strength: 700 lbs.
• Developed for joining soft, brittle or ductile materials to metal, and metal to metal
Important: KTR™ Nosepiece must be used to set these rivets. Nosepiece fits Hydraulic Installation Tool No. 95161.
Technical Specifications
| Item#: | 97084 |
|---|---|
| Type | Nosepiece |
| Size | 3/16 " |
| Structural Rivet Capability | KTR™ |
| UNSPSC #: | 27112402 |
| TAA Compliant: | Yes |
| Weight: | 0.015 lb |
