Pilotdrive Cryotap 9/16"-12 Starter Hand Tap
(Pack of
1)
SKU:DY80635019 Item#: DY80635019
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Sheet Metal Drill Bit Alloy Steel 5/32"
$0.00
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 32 TPI
$0.00
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3"
$0.00
Couldn't load pickup availability
Inner Panel Rustproofer LV 16.5oz
$0.00
Couldn't load pickup availability
Cable Tie Hook and Loop Roll 15' Orange
$0.00
Couldn't load pickup availability
High-Strength Double Side Molding Tape 1/2" x 50'
$0.00
Couldn't load pickup availability
Fender and Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap #6-32 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 8-32
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap 1"-8 Starter Hand Tap
$0.00
Couldn't load pickup availability
Cryo-Drap #12-24 Drill & Tap Combo, 135o Split Point, W/Flats
$0.00
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 8-36
$0.00
Couldn't load pickup availability
3-Flute HSS Plug Hand Tap M2 x 0.4
$0.00
Couldn't load pickup availability
100 Piece, 1/4" Shank Master Bit Set
$0.00
Couldn't load pickup availability
7" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635019 |
|---|---|
| Type | Fractional |
| Diameter | 9/16 " |
| Pitch | 12 |
| Flutes | 4 |
| Thread Length | 1 " |
| H Limits | H3 |
| Overall Length | 3-19/32 " |
| Recommended Drill Size | 31/64 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.14 lb |
Product Restrictions
