Pilotdrive Cryotap M10 x 1.5 Starter Hand Tap
(Pack of 1)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

Frequently Bought Together

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Sheet Metal Drill Bit Alloy Steel 1/4"

12" Auto-Adjust Pliers

Item#: DY89310303

2.1 Round Head Ratchet 3/8 Drive 168 Tooth

Item#: DY89285105

Master Series Penlight Flashlight

Fender Apron Drive Rivet 8mm Hole

Drive Rivet Nylon M8

Front Fender Push-Type Retainer Nylon 20mm

Pilotdrive Cryotap M6 x 1.0 Starter Hand Tap

Item#: DY80636014

Pilotdrive Cryotap #10-24 Starter Hand Tap

Item#: DY80635005

HSS Spiral Point Hand Tap 8-32

HSS Left Hand Plug Tap 5/16-18

4-Flute HSS Plug Hand Tap M14 x 1.5

Cryo-Drap #10-24 Drill & Tap Combo, 135o Split Point, W/Flats

Item#: DY80244413

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Utility Knife, Folding , 4" Closed

Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper

Item#: DY89310247

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80636020
Type	Metric
Diameter	M10
Pitch	1.5 mm
Flutes	4
Overall Length	2-15/16 "
Recommended Drill Size	8.5 mm
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.07 lb

Product Restrictions

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Sheet Metal Drill Bit Alloy Steel 1/4"

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 3/16"

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Scotch-Brite Roloc Bristle Disc 2"

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Your Recently Viewed Items