HSS Combination Drill-Tap M10
(Pack of
1)
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryo-Drap 3/8"-24 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability
Cryo-Drap 3/8"-16 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability
Cryo-Drap 5/16"-18 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Spot Weld Remover Drill Bit
Couldn't load pickup availability
Eraser Disc Natural Tan 4 x 1"
Couldn't load pickup availability
Megaspansion II Gray
Couldn't load pickup availability
Cut-Off Wheel Dispenser For 4-1/2" Diameter Wheels-Kent
Couldn't load pickup availability
Adhesive-Back Shim Stock 5/16 x 1/2" x 30'
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M18 x 2.5
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M16 x 2
Couldn't load pickup availability
Cryotap 1/2"-13 Tri-Pak
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
18V Impact Wrench Kit
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 27384 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | M10 |
| Pitch | 1.5 mm |
| Tap Length | 0.7500 " |
| Material Thickness | 3/4 " |
| Material | HSS |
| Overall Length | 4.06 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.1 lb |
Product Restrictions
