Pilotdrive Cryotap M14 x 1.5 Starter Hand Tap
(Pack of
1)
SKU:DY80636023 Item#: DY80636023
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3-1/4"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Flex-E-6001 Seam Sealer with Turbo Mixer
$0.00
Couldn't load pickup availability
8Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
Inner Panel Rustproofer LV 16.5oz
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap 1"-8 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 10-24
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 5/16-18
$0.00
Couldn't load pickup availability
3-Flute HSS Plug Hand Tap M2 x 0.4
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap M12
$0.00
Couldn't load pickup availability
HSS Left Hand Plug Tap 3/8-24
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit
$0.00
Couldn't load pickup availability
1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
$0.00
Couldn't load pickup availability
1/4" Cordless Impact Hex Driver Charging Bundle
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80636023 |
|---|---|
| Type | Metric |
| Diameter | M14 |
| Pitch | 1.5 mm |
| Flutes | 4 |
| Overall Length | 3-19/32 " |
| Recommended Drill Size | 12.5 mm |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.135 lb |
Product Restrictions
