Pilotdrive Cryotap M3 x 0.5 Starter Hand Tap
(Pack of
1)
SKU:DY80636004 Item#: DY80636004
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 24 TPI
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Double Flute Step Drill Bit 3/16 to 7/8"
$0.00
Couldn't load pickup availability
Quick Seal 2000 Sprayable Seam Sealer Black
$0.00
Couldn't load pickup availability
8Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
Flex-E-6001 Seam Sealer with Turbo Mixer
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M16 x 1.5 Starter Hand Tap
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap 7/16"-14 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 3/8-24
$0.00
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 3/8-16
$0.00
Couldn't load pickup availability
3-Flute HSS Taper Hand Tap 3-48
$0.00
Couldn't load pickup availability
2-Flute HSS Taper Hand Tap M1.6 x 0.35
$0.00
Couldn't load pickup availability
11Pc Lock and Load Hammer Set
$0.00
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
$0.00
Couldn't load pickup availability
Universal Socket Set, Metric, 3/8" Drive, 12pc
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80636004 |
|---|---|
| Type | Metric |
| Diameter | M3 |
| Pitch | 0.5 mm |
| Flutes | 3 |
| Overall Length | 1-5/16 " |
| Recommended Drill Size | 2.5 mm |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.01 lb |
Product Restrictions
