Pilotdrive Cryotap M6 x 1.0 Starter Hand Tap
(Pack of 1)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

Frequently Bought Together

Spot Weld Remover Drill Bit 5/16" (M8)

Curved Wood Handle Scratch Brush

Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank

Item#: PM08154300

Zinc-Rich Weld-Through Primer

Anti-Rattle/Squeak BRS Tape 8 x 10"

21 Compartment Small Drawer

Air Distributor Defroster Push-Type Retainer

Rivet Nylon 1/4"

Wheel House Molding Split Rivet Aluminum 3/16"

Pilotdrive Cryotap 1"-8 Starter Hand Tap

Item#: DY80635029

HSS Spiral Point Hand Tap 10-24

HSS Spiral Point Hand Tap 5/16-18

HSS Combination Drill-Tap 10-24

HSS Combination Drill-Tap 10-24

HSS Combination Drill-Tap M8

Zirconium Grain Locking Grinding Disc 2"

Reinforced Mini Cut-Off Wheel 3"

Item#: 93483M12

Polymer Wheel Rubber Eraser 30mm

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80636014
Type	Metric
Diameter	M6
Pitch	1.0 mm
Flutes	4
Overall Length	2-1/2 "
Recommended Drill Size	5 mm
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.03 lb

Product Restrictions

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

Sheet Metal Drill Bit Alloy Steel 3/16"

Scotch-Brite Roloc Bristle Disc 2"

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Your Recently Viewed Items