Sheet Metal Screw, Dual-Drive™ Phillips/Square Hex Head, Steel, Bright Zinc Finish, #8 x 1/2"
(Pack of
100)
SKU:P69663 Item#: P69663
• Dual thread pitch design provides greater thread engagement – drives faster and easier, and holds tighter
• Self-piercing point penetrates steel plates up to 16 Ga. (pilot hole is required for 1/2" lengths)
• Special head design draws material under head for full metal engagement
• Flanged teeth virtually eliminate strip-out
• Heat-treated for higher torque without breakage or head round-out
• Resisto-Guard™ plating – up to five times the corrosion resistance of standard zinc or cadmium plating
• Reusable
Frequently Bought Together
USS Flat Washer Thru-Hardened Steel 5/16"
$0.00
Couldn't load pickup availability
DIN 9021B Fender Washer Low Carbon Steel 18mm
$0.00
Couldn't load pickup availability
Hex Flange Nut Grade 8 Steel M8-1.25
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 35mm
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel 1/4-20
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel 5/16-18
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Oval Head #8 x 1-1/2"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Pan Head #8 x 1/2"
$0.00
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1-1/2"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Flat Head #8 x 1/2"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Pan Head #10 x 3/4"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Oval Head #8 x 1"
$0.00
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 10mm
$0.00
Couldn't load pickup availability
Product Description
• Dual thread pitch design provides greater thread engagement – drives faster and easier, and holds tighter• Self-piercing point penetrates steel plates up to 16 Ga. (pilot hole is required for 1/2" lengths)
• Special head design draws material under head for full metal engagement
• Flanged teeth virtually eliminate strip-out
• Heat-treated for higher torque without breakage or head round-out
• Resisto-Guard™ plating – up to five times the corrosion resistance of standard zinc or cadmium plating
• Reusable
Technical Specifications
| Item#: | P69663 |
|---|---|
| Diameter | #8 |
| Length | 1/2 " |
| Head Style | Hex |
| Finish | Bright Zinc |
| Material | Carbon Steel |
| Drive | Phillips/Square |
| Pilot Hole | No. 27 |
| Size | 8X1/2 " |
| Type | Sheet Metal Screw |
| UNSPSC #: | 31161506 |
| TAA Compliant: | Yes |
| Weight: | 0.44 lb |
