SnapSkru® Self-Drilling Wall Anchor Kit, Nylon, #8 to #10 Screw Diameter, 50 Pieces
(Pack of
1)
SKU:18286 Item#: 18286
18286 Contains:25 SnapSkru™ Standard Anchors (No. 50878) and 25 No. 8 x 1-1/2" Phillips Pan Head Sheet Metal Screws (No. 85222)
• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Frequently Bought Together
Masonry Anchor Assortment 700Pcs
$0.00
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
$0.00
Couldn't load pickup availability
Toggle Bolt Anchor Assortment 70Pcs
$0.00
Couldn't load pickup availability
Masonry Anchor Phillips Head #14-10 x 2-3/4"
$0.00
Couldn't load pickup availability
Drop-In Anchor Steel 1/2 x 2"
$0.00
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 5/16 x 1-3/4"
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 20mm
$0.00
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
$0.00
Couldn't load pickup availability
DIN 6921 Hex Flange Bolt Grade 8.8 M8-1.25 x 16mm
$0.00
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
Product Description
18286 Contains:25 SnapSkru™ Standard Anchors (No. 50878) and 25 No. 8 x 1-1/2" Phillips Pan Head Sheet Metal Screws (No. 85222)• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Technical Specifications
| Item#: | 18286 |
|---|---|
| Type | Wall Anchors |
| Material | Nylon |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.59 lb |
