SNAPTOGGLE® Toggle Bolt Anchor 1/2-13
(Pack of
10)
Three times faster than conventional toggle bolts
Requires a smaller pilot hole and uses a shorter bolt
Stays in place with or without a bolt
Heads won’t fall behind wall
Wall or ceiling thickness range: 3/8" 2-1/2"
Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Frequently Bought Together

Masonry Anchor Phillips Head #14-10 x 2-1/4"
Couldn't load pickup availability

Lag Screw Shield Anchor Long Style 3/8 x 2-1/2"
Couldn't load pickup availability

Double Expansion Shield Anchor Alloy Steel 5/8"
Couldn't load pickup availability

Hammerlock Cotter Pin Kit 140Pcs
Couldn't load pickup availability

Hammerlock Cotter Pin Kit 75Pcs
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M10-1.25 x 16mm
Couldn't load pickup availability

Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability

Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability

Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability

Hollow Wall Screw Anchor Steel Short Style 1/8"
Couldn't load pickup availability

Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 6"
Couldn't load pickup availability

Hollow Wall Anchor Setting Tool
Couldn't load pickup availability
Product Description
Three times faster than conventional toggle bolts Requires a smaller pilot hole and uses a shorter bolt
Stays in place with or without a bolt
Heads won’t fall behind wall
Wall or ceiling thickness range: 3/8" 2-1/2"
Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Technical Specifications
Item#: | 90920 |
---|---|
Type | Toggle Bolt Anchor |
Size | 1/2-13 " |
Diameter | 1/2 " |
Thread | Coarse |
Thread Pitch | 13 tpi |
Drill Size | 3/4 " |
Tensile Proof Test Load In Concrete | 2,038 lb |
Shear Proof Test Load | 2,728 lb |
Tensile Proof Test Load | 2038 lb |
Bolt Size | 1/2-13 " |
UNSPSC #: | 31162103 |
TAA Compliant: | Yes |
Weight: | 0.68 lb |
Product Restrictions
