Solid Die Drill Bit, Carbide, 5/8" Flute Length, 1/8 x 1-1/2"
(Pack of
1)
SKU:56262 Item#: 56262
• Produces chips without generating excessive heat
• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryo Armor Cut 1" Dia. Drill Bit, Carbide 118o Point
Couldn't load pickup availability
Cryo Armor Cut 7/8" Dia. Drill Bit, Carbide 118o Point
Couldn't load pickup availability
Cryo Armor Cut 13/16" Dia. Drill Bit, Carbide 118o Point
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
Couldn't load pickup availability
Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper
Couldn't load pickup availability
12" Auto-Adjust Pliers
Couldn't load pickup availability
Product Description
• Produces chips without generating excessive heat• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 56262 |
|---|---|
| Drill Type | Fractional |
| Type | Drill Bit |
| Material | Carbide |
| Finish | Bright |
| Diameter | 1/8 " |
| Decimal Equivalent | 0.1250 " |
| Flutes | 2 |
| Flute Length | 5/8 " |
| Shank | Straight |
| Material Thickness | 9/16 " |
| Overall Length | 1-1/2 " |
| SAE Code | TD7DSX 0.1250 S1Z33 / 00.63 - 01.50 |
| UNSPSC #: | 23241605 |
| TAA Compliant: | Yes |
| Weight: | 0.01 lb |
Product Restrictions
