Knot-Type End Brush, 0.014" Wire, 1-1/8" Outer Diameter, 1/4" Shank Diameter, 7/8" Shank Length, Steel
(Pack of 1)

SKU:89208 Item#: 89208

Regency®

• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Retaining plate design of knot-type brush provides greater brush efficiency and safety – no sharp corners to damage wire filaments – wire loss is minimal – each round hole secures only one tuft
• For spot facing, rubber or plastic flash removal, scale or slag removal, rust or paint removal, die, mold and tool polishing, cleaning or finishing recessed areas, weld cleaning, and carbon cleaning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Check Availability

Quantity

Catalog page#: 10-65

Frequently Bought Together

Double Spiral Tube Brush 5/8"

Item#: 92008M06

Double Spiral Tube Brush 1"

Single Row Knot-Type Cup Brush 2-3/4"

Steel Crimped End Brush 1/2"

Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats

Item#: DY80600864

Air Saw Blade 4" 24TPI

Steel Crimped End Brush 3/4"

Nylon Miniature End Brush 3/4"

Circular Flared End Brush 3" Dia., .008" Wire Dia., 1/4" Shank

Item#: DY83330300

Fender Splash Shield Retainer Nylon 20mm

Radiator Grille Nut M4.2-1.41

Push-Type Retainer Nylon 15mm

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

1/4" Cordless Impact Hex Driver Charging Bundle

Item#: 1638995CB

Razor Blade Single Edge w/Notch

Product Description

• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Retaining plate design of knot-type brush provides greater brush efficiency and safety – no sharp corners to damage wire filaments – wire loss is minimal – each round hole secures only one tuft
• For spot facing, rubber or plastic flash removal, scale or slag removal, rust or paint removal, die, mold and tool polishing, cleaning or finishing recessed areas, weld cleaning, and carbon cleaning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Technical Specifications

Item#:	89208
Type	Knot-Type
Material	Steel
O.D.	1-1/8 "
Wire Gauge	0.014 "
Maximum RPM	22,000
Shank Size	1/4 "
Shank Length	7/8 "
UNSPSC #:	27111907
TAA Compliant:	Yes
Weight:	0.23 lb

Product Restrictions

Suggested Products

Stemmed Knot-Type Wire Wheel 3"

Steel Crimped End Brush 1/2"

Curved Wood Handle Scratch Brush

Stemmed Crimped Wire Wheel 3"

Curved Wood Handle Scratch Brush

Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank

Item#: PM08154300

Stemmed Crimped Wire Wheel 2"

Double Spiral Tube Brush 1/2"

Item#: 92007M03

Steel Crimped Cup Brush 1-3/4"

Stemmed Crimped Wire Wheel 3"

Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank

Item#: PM08154305

Curved Wood Handle Scratch Brush

Your Recently Viewed Items