Tamper-Proof Nail Drive Anchor Steel 1/4 x 3/4"
(Pack of
50.0)
• 100% rust-resistant zinc alloy
1. With fixture in place, drill hole same size as anchor diameter.2. Insert nail anchor until collar of sleeve is flush with fixture plate.3. Hammer nail flush into head of sleeve. Anchor is now set.
Frequently Bought Together
Masonry Anchor Phillips Head #14-10 x 2-3/4"
Item#: 59664
Couldn't load pickup availability
Drop-In Anchor Steel 1/2 x 2"
Item#: 96954
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 5/16 x 1-3/4"
Item#: 60753
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 45mm
Item#: 28685
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 50mm
Item#: 28696
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Item#: 53981
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
Item#: KT13984
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Item#: P43782
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Item#: 1513544
Couldn't load pickup availability
Tubular Anchor Plastic Orange #16 to #18
Item#: 92561
Couldn't load pickup availability
Tamper-Proof Nail Drive Anchor Steel 1/4 x 2"
Item#: 91619
Couldn't load pickup availability
Tubular Anchor Plastic Orange #16 to #18
Item#: 92562
Couldn't load pickup availability
Product Description
• 100% rust-resistant zinc alloy1. With fixture in place, drill hole same size as anchor diameter.2. Insert nail anchor until collar of sleeve is flush with fixture plate.3. Hammer nail flush into head of sleeve. Anchor is now set.
Technical Specifications
| Item#: | 91615 |
|---|---|
| Length | 3/4 " |
| Type | Tamper-Proof Nail Drive Anchor |
| Size | 1/4X3/4 " |
| Diameter | 1/4 " |
| Material | Steel |
| Proof Test Load In Concrete | 600 lb |
| Anchor Size | 1/4 x 3/4 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.76 lb |
Product Restrictions
